VBar NEO/EVO VLink
All about the NEO/EVO helicopter versions
| Subject | Views | Posts | Last post |
|---|---|---|---|
| Question about V8 settings on the M7R translated by sme | Views: 0 | Posts: 7 |
28 February 2026 14:3828.02.2026 14:38 by sme |
| Vbar Neo loses connection translated by smtjets | Views: 0 | Posts: 5 |
24 February 2026 16:2824.02.2026 16:28 by smtjets |
| Wobble over Nick Logo 600Se translated by steveman | Views: 0 | Posts: 29 |
20 February 2026 21:0020.02.2026 21:00 by steveman |
| VBar Evo SOKO Kit setting translated by stephan.ernst@gmx.de | Views: 0 | Posts: 4 |
19 February 2026 20:1219.02.2026 20:12 by RV |
| V8 Main Rotor Gain Questions translated by jgmeiner | Views: 0 | Posts: 8 |
12 February 2026 10:0712.02.2026 10:07 by Eddi E. aus G. |
| Mid-range pulse 125 and 250 - how many bits and already tested? translated by HelischuleGonzalez | Views: 0 | Posts: 6 |
7 February 2026 11:5907.02.2026 11:59 by HelischuleGonzalez |
| VBar EVO Alu-case by Pawel Plesniak | Views: 0 | Posts: 2 |
2 February 2026 09:3602.02.2026 09:36 by Eddi E. aus G. |
| vstabi problem translated by linken98 | Views: 0 | Posts: 5 |
2 February 2026 09:2502.02.2026 09:25 by Eddi E. aus G. |
| Vbar evo by surf10plus23@gmail.com | Views: 0 | Posts: 11 |
30 January 2026 23:5230.01.2026 23:52 by surf10plus23@gmail.com |
| Base gas on rotary potentiometer or trim knob translated by Master FBL | Views: 0 | Posts: 3 |
29 January 2026 17:0629.01.2026 17:06 by Master FBL |
| Engine switch Off -> Idle -> On in the flightlog translated by Rony | Views: 0 | Posts: 3 |
28 January 2026 12:4228.01.2026 12:42 by Rony |
| Mikado Power Backup 3x50F VBar Control # 05584 translated by linken98 | Views: 0 | Posts: 5 |
22 January 2026 18:2822.01.2026 18:28 by linken98 |
| Weight U/I Sensor #05492 translated by Max8200 | Views: 0 | Posts: 6 |
21 January 2026 15:4921.01.2026 15:49 by Max8200 |
| Marcocell help needed by GlenDavis1971 | Views: 0 | Posts: 10 |
20 January 2026 19:2120.01.2026 19:21 by Fingolf |
| Can't change stick Mode by GlenDavis1971 | Views: 0 | Posts: 6 |
20 January 2026 12:4620.01.2026 12:46 by GlenDavis1971 |
| Unable to bind to vbar evo - exclamation point by gorix | Views: 0 | Posts: 8 |
19 January 2026 09:0319.01.2026 09:03 by Eddi E. aus G. |
| 8° at the four-blade head translated by Stephan | Views: 0 | Posts: 13 |
15 January 2026 20:1215.01.2026 20:12 by RV |
| Aluminum housing for Vstabi Evo? translated by cc1975 | Views: 0 | Posts: 2 |
15 January 2026 09:2115.01.2026 09:21 by Eddi E. aus G. |
| Binding problem VBar Evo translated by mf_powerfly | Views: 0 | Posts: 22 |
5 January 2026 09:3505.01.2026 09:35 by Eddi E. aus G. |
| Uninstall V8.2 again translated by Icuk73 | Views: 0 | Posts: 3 |
2 January 2026 16:0202.01.2026 16:02 by Fingolf |
| Servo travel for roll and pitch is too large translated by Vortex_182 | Views: 0 | Posts: 10 |
20 December 2025 20:5520.12.2025 20:55 by RV |
| Vbar Neo-mini by xerolift | Views: 0 | Posts: 8 |
16 December 2025 09:0616.12.2025 09:06 by Eddi E. aus G. |
| VBar 8.2 on TRex 550X translated by Chriss | Views: 0 | Posts: 4 |
6 December 2025 14:3906.12.2025 14:39 by ulrich |
| Swashplate type with twisting translated by TomD | Views: 0 | Posts: 28 |
4 December 2025 10:4304.12.2025 10:43 by JMalberg |
| Can VBar EVO Basic be operated with 12V? translated by PMDirk | Views: 0 | Posts: 2 |
28 November 2025 19:1828.11.2025 19:18 by RV |