← VBar NEO/EVO VLink

Marcocell help needed

VBar › VBar NEO/EVO VLink · Started by GlenDavis1971 on 20 January 2026 13:0120.01.2026 13:01
GlenDavis1971 20 January 2026 13:0120.01.2026 13:01
Hi all

I am need of some help with MACROCELLS.

I am renovating an old smart models blue thunder. It has 2 separate motors to power main rotor and Fenestron. Tail control is via a servo

I am using a scorpion Tribrunus !! for the main rotor and Hobbywing platinum V5 for the Fenestron.

I am connecting the main rotor esc to the ESC port on the EVO, Fenestron ESC into channel 4 and the tail servo into Tail.

The Fenestron ESC will be prpgrammed to come up speed before the main rotor to counter torque.

I want to control main head speed and fenestron speed using the Bank switch. Channel 4 linked to bank switch to control fenestron speed. The motor switch to turn on/off both main and tail motors.

The idea is when I move the motor switch to on both motors start their spool up. The Fenestron reaches fight speed first. when bank 2/3 is select both motors increase speed and decrease when switched back. should motor standby be selected both motors stop and if set back to on rapid spool up. When off is selected both motors shut down.

I need help programming the Marco cells to achieve this.

Fingolf 20 January 2026 13:0820.01.2026 13:08
I have the same model. I can share my setup if you like.
There is no need to do this with different banks from my pov.
My fenestron is changed to an aluminium version.
I had no good experience with the original one.


Stephan

GlenDavis1971 20 January 2026 13:3520.01.2026 13:35
Fingolf schrieb:
-------------------------------------------------------
> I have the same model. I can share my setup if you
> like.
> There is no need to do this with different banks
> from my pov.
> My fenestron is changed to an aluminium version.
> I had no good experience with the original one.
>
>
> Stephan


That would be grate thank you.

Why do you think no need to do this in different banks? I would like 1 switch to control the different speed of both motors and for safty one switch turn on and off both motors.

Where do I get a new fenestron?
JMalberg 20 January 2026 14:2720.01.2026 14:27
Hi Glen,

all you have to do is to mirror the ESC-Output to CH4.

Macrocell 04/CH4:
Typ: Channel
Input: FC ESC
the other params as your Tail-ESC need it.

So your Tail-ESC will get the same Input as the Main-ESC and behaves the same.

But I'm not sure this will do with the VBAR GOV @RV @Fingolf Was meint ihr?

Gruß Jürgen
( hier noch die fehlenden Kommata zu freien Verwendung in meinen Beiträgen: ,,,,,,,,, )
Fingolf 20 January 2026 14:3220.01.2026 14:32
Motor switch for both ESC.
Only one headspeed and only one fenestron speed.

The fenestron is custom build with CAD. It was over 1000.- € back in the days.
If you need the files - no problem.

But you can try it with the standard setup. Maybe it will work for you.

Stephan
GlenDavis1971 20 January 2026 14:4420.01.2026 14:44
thanks but that's no good as they will be running at very different speeds. main rotor at abour 1400rpm and the tail between 8000 and 10000rpm
Fingolf 20 January 2026 14:5320.01.2026 14:53
Yes that is correct and no problem.
Main motor at ESC output and fen motor at AUX1 as example.
Macrocell for this output with a fixed value.
Fingolf 20 January 2026 14:5820.01.2026 14:58
Hi Jürgen,

Copying the normal ESC value is not possible. A direct value is needed specifically for the Fen key so that it can be set independently.
machine-translated from German · Show original
GlenDavis1971 20 January 2026 14:5920.01.2026 14:59
Fingolf schrieb:
-------------------------------------------------------
> Yes that is correct and no problem.
> Main motor at ESC output and fen motor at AUX1 as
> example.
> Macrocell for this output with a fixed value.


that's right but I want both motors to be turn on and off by the motor switch and speed controlled by the bank switchso icrease in headspeed and gains also gives increase in tail speed

its actually programming or macrocell chain to achieve this I'm struggling with.
Fingolf 20 January 2026 19:2120.01.2026 19:21
I see, you managed it to work.
That's fine, i don't get it what is the use to change the headspeeds but ok.

Feel free to come back with any questions.

Here is a flight 9 years ago: https://youtu.be/r9Gdc0PqZdk?si=hUuLFLrMbqiV4Xx-

Now it flies with 2 Evo V8 (one Evo as an extender)


Stephan
VStabi VStabi Pioneer of Flybarless