← VBar NEO/EVO VLink

Engine switch Off -> Idle -> On in the flightlog translated

VBar › VBar NEO/EVO VLink · Started by Rony on 27 January 2026 16:2627.01.2026 16:26
Rony 27 January 2026 16:2627.01.2026 16:26
Hello Mikado Team

I use the motor switch without having adjusted much, with a 3-way switch in the upper right corner.
The flight log looks like this, is that how it's supposed to be?

Shouldn't you start the engine while it's off-idle, or did I hear that wrong somewhere?

And I assume Idle would be for the short startup period for auroras, right?

Regards, Rony

01/25/2026 3:31:04 p.m.;VBar Start -- TRON 550 -- *********** -- V 8.2 -- pl 8
25.01.2026 15:31:04 Good; Cold start
25.01.2026 15:31:04 Good; Reset Reason: Power On
25.01.2026 15:31:04 Good; Bank 1 loaded
25.01.2026 15:31:09 Good; Calibration complete
01/25/2026 3:31:10 p.m. Good; HW controller detected
25.01.2026 15:31:26 Good; Manual battery selection: Maniax IV
25.01.2026 15:32:09 Info; Speed controller switched ON
25.01.2026 15:32:10 Good; Motor switch Motor On
25.01.2026 15:32:24 Good; Bank 2 loaded
25.01.2026 15:38:22 Good; Bank 1 loaded
25.01.2026 15:40:21 Info; Speed controller switched to idle
01/25/2026 3:40:21 PM Info;Off - Controller - Umin:20.8V Imax:114.1A Temp:31?
25.01.2026 15:40:21 Good; Engine switch Idle Start
25.01.2026 15:40:21 Info; Speed controller switched to OFF
25.01.2026 15:40:22 Good; Motor switch Motor Off
01/25/2026 3:41:33 PM;VBar Logfile End -- 01/25/2026 -- 3:41:33 PM
25.01.2026 15:41:34 Good;HW Controller Separated



Edited twice. Last edited on January 27, 2026 at 5:00 PM by Rony.
machine-translated from German · Show original
RV 27 January 2026 21:4627.01.2026 21:46
That's okay.

The "off" status when switching on the model is not a change of status - it is already there.

Since the only step is from "Off" to "On," the intermediate step "Idle" is not logged because it's irrelevant. However, if you then move from "On" to the middle (Idle) position, that's the AR setting for a quick boot-up when toggling back to "On."

Later, when shutting down, there is something to consider... Messages within the same second may not have occurred in the order shown in the log, as the timestamp is only based on 1-second intervals.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Rony 28 January 2026 12:4228.01.2026 12:42
Ah, okay, so it's just some log clutter and not the effective command chain that's "wrong," that's a relief.

Thanks for the info

Regards, Rony



Edited once. Last edited on January 28, 2026 at 12:42 PM by Rony.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless