← VBar NEO/EVO VLink

VBar Evo SOKO Kit setting translated

VBar › VBar NEO/EVO VLink · Started by stephan.ernst@gmx.de on 18 January 2026 12:5918.01.2026 12:59
stephan.ernst@gmx.de 18 January 2026 12:5918.01.2026 12:59
Hello everyone,

I'm currently setting up my RAW580 with VBar Evo (with rescue system) according to the SOKO Kit instructions. However, I'm stuck on step 4.4 "Do not change the servo center position, but rather the upper and lower servo endpoints".

How can I adjust the servo endpoints on my Control Touch?

Thanks and regards
Stephan
machine-translated from German · Show original
RV 19 January 2026 07:2619.01.2026 07:26
Not at all.

Don't overthink it. I looked at it and ordered it myself – but it's not really helpful. Far too complex for far too little benefit. Your eye and a pitch gauge are all you need. The TS is never perfectly straight in flight anyway. This static approach also neglects aerodynamic effects in flight, so please don't take it as literally as you could with the tool; it's of little relevance in a dynamic environment.

Take your visual estimation from a distance of 1 meter and look at the TS to the HRW from 2 different angles. That's perfectly sufficient.

If, after the normal "trim" at zero pitch (the blade-folding method is the most accurate here, included free with every helicopter), all the servo arms are at right angles (eyeballing it is enough) - then the swashplate is just in the way enough.
Anyone who still wants to perform end-position trimming (axis by axis) can do so in TS Expert. However, in that case, things have already gone wrong at the point mentioned above.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 19.01.2026 07:29 von RV.
machine-translated from German · Show original
Chriss 19 February 2026 18:5619.02.2026 18:56
How does the "leaf-folding method" work?

with a 5-leaf head?

Kind regards
machine-translated from German · Show original
RV 19 February 2026 20:1219.02.2026 20:12
https://www.vstabi.info/de/node/1545

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless