Max8200
7 January 2026 16:1807.01.2026 16:18
Hello and Happy New Year!
In short:
Does anyone know the weight of the U/I sensor for the L200, part number #05492?
For the new year, I've decided to swap the fixed-wing aircraft from the red G to Mikado as well, and I'm considering whether to install telemetry controllers (YGE 35) or the U/I sensor for battery capacity in the smaller planes. The latter would probably still be easier and, above all, significantly cheaper to implement.
Best regards
Lars
Hallo und noch ein frohes Neues!
Kurz und knapp:
Hat jemand das Gewicht des U/I Sensors für den L200, Bestellnummer #05492?
Fürs neue Jahr hab ich mir in den Kopf gesetzt die Flächenflieger vom roten G ebenfalls zu Mikado zu swappen und ich überlege ob ich in den kleineren Fliegern Telemetrieregler (YGE 35) oder den U/I Sensor einbaue für die Akkukapazität. Letzteres wäre ggf immer noch leichter und vor allem deutlich günstiger realisierbar.
Viele Grüße
Lars
Max8200
11 January 2026 13:1211.01.2026 13:12
I then took matters into my own hands and bought a sensor; it was ultimately the right decision.
The U/I sensor weighs exactly 5.7g.
If you omit the XT30 connector on the controller side and solder the controller directly, you can achieve even better results, and it is ultimately significantly cheaper and lighter than using a full-fledged telemetry controller, which is only available from 35A upwards, in a motor glider.
Edited once. Last edited on 11/01/2026 at 13:13 by Max8200.
Hab mir dann mal selber geholfen und einen Sensor gekauft, war final die richtige Entscheidung.
Der U/I Sensor wiegt exakt 5,7gr.
Wenn man den Reglerseitigen XT30 Anschluss weg lässt und den Regler direkt anlötet, geht da nochmal was und man ist final deutlich günstiger und leichter als einen vollwertigen Telemetrieregler die es erst ab 35A gibt zu im Motorsegler zu verwenden.
1 mal bearbeitet. Zuletzt am 11.01.2026 13:13 von Max8200.
RV
11 January 2026 23:1111.01.2026 23:11
Ah - unfortunately I didn't have one handy to weigh.
Perfect - thanks!
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Ah - ich hatte leider keinen zur Hanzd zum wiegen.
Passt - Danke!
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Max8200
13 January 2026 17:0213.01.2026 17:02
The housing of the 7-channel RX-only weighs 5.15g, so remove the housing, put heat shrink tubing over it, attach the U/I sensor, and there's almost no weight penalty :-)
Tomorrow I'll put the plane on the center of gravity scale; maybe I can move my trim cent behind the motor bulkhead since the previously installed, stripped-down GR12L was a bit lighter.
What's cool is that the programming was super easy; banks, center position... done in a flash. Now I just need to figure out how to "install" the trim wheels for the maiden flight with Mikado.
Das Gehäuse vom 7 Kanal RX-only wiegt übrigens 5,15gr, somit Gehäuse weg, Schrumpfschlauch drüber, U/I Sensor dran und fast keinen Nachteil beim Gewicht :-)
Morgen spax ich den Flieger mal auf die Schwerpunktwaage, vielleicht kann ja meinen Trimmcent hinterm Motorspant gehen da der vorher verbaute, gestrippte GR12L doch etwas leichter war.
Was cool ist: Programmierung war super easy, Bänke, Mittelstellung.... ruck zuck erledigt. Jetzt muss ich das nur noch verstehen die Trimmräder "einzubauen" für den Erstflug mit Mikado.
RV
13 January 2026 19:5813.01.2026 19:58
Ah - just my two cents ;-)
Trim wheels:
Modify the parameters, install the app, and assign them. It's best to assign them relatively.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Ah - just my Cent ;-)
Trimräder:
Parameter Modifizieren App dazu installieren und zuweisen. am Besten relativ zuweisen.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Max8200
21 January 2026 15:4921.01.2026 15:49
Quick feedback: It worked perfectly with the parameter app.
Now the thing just needs to get airborne :-)
Kurzes Feedback: Hat wunderbar geklappt mit der Parameter App.
Jetzt muss das Ding nur noch in die Luft :-)