← VBar NEO/EVO VLink

Mikado Power Backup 3x50F VBar Control # 05584 translated

VBar › VBar NEO/EVO VLink · Started by linken98 on 22 January 2026 14:3722.01.2026 14:37
linken98 22 January 2026 14:3722.01.2026 14:37
Hello,

I wanted to ask if I can use the power backup without looping it through, simply by connecting it to a free port on the stabilizer, like Aux1 or Aux2? Or how is it usually done? I remember it that way from my old helicopter.
The instructions with the picture are confusing me; it says to loop through servos or controllers, I don't quite understand that :-(

I just need a buffer, nothing more.

lg
machine-translated from German · Show original
Eddi E. aus G. 22 January 2026 15:1322.01.2026 15:13
Good morning,

You _can_ loop through – for example, if you don't have another free connection – but you _don't have to.
Simply plug it in, be happy :-)

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
linken98 22 January 2026 15:1622.01.2026 15:16
Ah, now I understand. One more question, maybe someone can help me with this: Will I have a problem with backflow with the YGE Aureus 185, or is it now as simple as just plugging it in and being done with it? Best regards



Edited once. Last edited on 22.01.2026 at 15:17 by linksen98.
machine-translated from German · Show original
Dirtygeri 22 January 2026 17:3622.01.2026 17:36
Hello!
I only have YGE ESCs and Mikado Power Backup everywhere... helicopter + plane... plug and play...
It works :-) , No problem
Best regards, Geri
machine-translated from German · Show original
linken98 22 January 2026 18:2822.01.2026 18:28
Dirtygeri wrote:
-------------------------------------------------------
Hello!
I only have YGE controllers and Mikado everywhere.
Power Backup ... Helicopter + Plane ... Plug it in and
> Flies ...
It works :-) , No problem
> LG Geri

Thank you :-)
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless