gorix
16 January 2026 01:2116.01.2026 01:21
Hi,
I'm unable to connect to my vbar evo. It was working fine during servo centering phase on new model but now I'm getting exclamation point on red background in bind screen (file attached). Please advise how to proceed.
Regards,
Grzegorz
Eddi E. aus G.
16 January 2026 09:4916.01.2026 09:49
Hi,
the exclamation mark appears when you open the bind dialog, power up a VBar EVO for example, it appears in the bind dialog, then when you power it down again while the bind dialog is still open. This is normal to indicate that the unit is no longer 'online', no longer selectable for binding.
Start over (close bind dialog, power cycle VBar EVO, open bind dialog again until the unit shows (flashes red-green, then), bind), and everything should be fine again.
Kind regards
Eddi
Born to fly ...
forced to work.
gorix
16 January 2026 13:2416.01.2026 13:24
Hi,
it still doesn't work. When I opened new bind window and restarted vbar evo new entry with serial number appeared after 45 seconds of green/red blinking lights but then after 2-3 seconds exclamation point appeared and I'm not able to connect.
This issue started after I've moved vbar from plastic to metal case (both Mikado).
I've tried changing software from v8.2 Rescue to PRO and v7.x but behavior is the same.
Sometimes when vbar is restarted it will connect for 1 second and then automatically disconnect.
This vbar had rescue license moved from different unit that was sent to Mikado for inspection after crash during rescue feature test.
Is there something else I can try? Does it make sense to create service ticket for this kind of issue?
Regards,
Grzegorz
2 mal bearbeitet. Zuletzt am 16.01.2026 13:30 von gorix.
RV
16 January 2026 19:1616.01.2026 19:16
Quote:This issue started after I've moved vbar from plastic to metal case (both Mikado).
Okay - spo please remove the metal housing and retry. Might probably have shortened something inside or damaged the antenna sockets?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Quote:This issue started after I've moved vbar from plastic to metal case (both Mikado).
Okay - spo please remove the metal housing and retry. Might probably have shortened something inside or damaged the antenna sockets?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
gorix
16 January 2026 21:1716.01.2026 21:17
Thank you for the feedback. The issue persists without the metal case. I guess I've damaged something while removing or inserting the board.
Regards,
Grzegorz
RV
17 January 2026 11:3517.01.2026 11:35
Ok - hmmm ... lets see what our service can do for you here.
please open a service case for the VBar.
Therefore log into vstabi.info, then go to your items (left bottom), click on the servie icon of this device in your list.
If the device is not registered - register previuosly or type in the serial number manually.
A form comes up - please add your contact data and in the second form a error description. You can also add a image or logfile. In case of a warranty request we need the purchase invoice here too.
You will get a confirmation mail after all stored in our system.
The service will then work on your case as soon as possible and contact you by email.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
gorix
17 January 2026 20:4317.01.2026 20:43
Thank you for the explanation. RMA ID 28747 was created.
Regards,
Grzegorz
1 mal bearbeitet. Zuletzt am 17.01.2026 20:48 von gorix.
Eddi E. aus G.
19 January 2026 09:0319.01.2026 09:03
Hi Grzegorz,
I have just sent shipping information, we better check this here at our service shop.
Please send everything as it is now, electronics, cases, so we can have a close look.
Best,
Eddi
Born to fly ...
forced to work.