VBar NEO for external transmitters
Helico helicopters with NEO that still fly without VBar Control
| Subject | Views | Posts | Last post |
|---|---|---|---|
| Bank switching DX9 with hold switch and 3-way switch possible. translated by janosch160 | Views: 0 | Posts: 7 |
10 April 2016 21:4610.04.2016 21:46 by janosch160 |
| Problem initializing translated by MarkusD | Views: 0 | Posts: 6 |
10 April 2016 20:3910.04.2016 20:39 by patrickL3 |
| The configuration option "Cyclical" displays minus 8 degrees. translated by Impact101 | Views: 0 | Posts: 2 |
10 April 2016 08:2910.04.2016 08:29 by RV |
| Problem with the parameters of the collective and cyclic by above | Views: 0 | Posts: 2 |
9 April 2016 21:0009.04.2016 21:00 by RV |
| Can I plug the TM1000 into the Neo as a power supply? translated by janosch160 | Views: 0 | Posts: 2 |
9 April 2016 09:2109.04.2016 09:21 by RV |
| Unsubscribe from Neo? translated by bmw-cyclist | Views: 0 | Posts: 2 |
8 April 2016 13:3108.04.2016 13:31 by Fingolf |
| Rescue too slow...? translated by Franky138 | Views: 0 | Posts: 2 |
8 April 2016 12:1608.04.2016 12:16 by ulrich |
| The rear "rattles" during rescue... translated by Franky138 | Views: 0 | Posts: 3 |
8 April 2016 11:5308.04.2016 11:53 by Franky138 |
| Kosmik and Neo - Ext controller translated by bmw-cyclist | Views: 0 | Posts: 11 |
7 April 2016 20:3207.04.2016 20:32 by RV |
| vbar neo gov with yge 120 lv soft start up! translated by kai123 | Views: 0 | Posts: 5 |
6 April 2016 22:4406.04.2016 22:44 by kai123 |
| Kosmik Neo connection translated by bmw-cyclist | Views: 0 | Posts: 3 |
6 April 2016 18:3406.04.2016 18:34 by bmw-cyclist |
| Neo and Futaba 18SZ translated by Vinger | Views: 0 | Posts: 5 |
6 April 2016 10:0506.04.2016 10:05 by RV |
| external throttle controller throttle path teach-in translated by sprest | Views: 0 | Posts: 4 |
5 April 2016 23:1905.04.2016 23:19 by sprest |
| External controller translated by guepo1 | Views: 0 | Posts: 43 |
5 April 2016 22:2905.04.2016 22:29 by RV |
| Aileron sensor value out of range translated by racer-g | Views: 0 | Posts: 5 |
5 April 2016 15:0805.04.2016 15:08 by racer-g |
| Sudden lift off. translated by barnes_cliff | Views: 0 | Posts: 5 |
5 April 2016 01:0205.04.2016 01:02 by barnes_cliff |
| Vstabi Neo - No servo response translated by heli-commander | Views: 0 | Posts: 3 |
3 April 2016 13:1003.04.2016 13:10 by heli-commander |
| Vstabi Neo transmission error when sending data, timeout translated by christianP | Views: 0 | Posts: 8 |
3 April 2016 12:2503.04.2016 12:25 by christianP |
| Set clock translated by Nordseeheli | Views: 0 | Posts: 3 |
1 April 2016 21:0501.04.2016 21:05 by Nordseeheli |
| Heli bounces on Nick translated by JeMa | Views: 0 | Posts: 10 |
1 April 2016 10:4401.04.2016 10:44 by daniel33 |
| VBAR Neo with Castle Creations Talon 90 and Futaba T14SG translated by EdiHaag | Views: 0 | Posts: 6 |
1 April 2016 08:4101.04.2016 08:41 by RV |
| Vbar NEO 6.1 PRO - Gas channel ESC - translated by pro50 | Views: 0 | Posts: 8 |
30 March 2016 09:4030.03.2016 09:40 by Eddi E. aus G. |
| Neo displays initialization error translated by TomD | Views: 0 | Posts: 11 |
30 March 2016 09:2830.03.2016 09:28 by ulrich |
| From Graupner to Vbar Control and Vstabi neo 6.1 Express translated by hotzi99 | Views: 0 | Posts: 2 |
28 March 2016 10:1028.03.2016 10:10 by RV |
| Diabolo 700 tail oscillation in crosswinds translated by Wolv | Views: 0 | Posts: 4 |
26 March 2016 12:0226.03.2016 12:02 by Wolv |