← VBar NEO for external transmitters

Problem with the parameters of the collective and cyclic

VBar › VBar NEO for external transmitters · Started by above on 9 April 2016 18:1709.04.2016 18:17
above 9 April 2016 18:1709.04.2016 18:17
Heli gaui x5 formula.

I have adjusted the parameters of the FBL to give me +12 and -12 in the menu collective and the result is: Max pos collective:72 and Max pos negative collective 70, this is outside the recommended values. I can have problems?.
Because reason happens?
In the cyclic value is the same value is 61, to 8 degrees.
RV 9 April 2016 21:0009.04.2016 21:00
Well - problems may not expected - a lot of helis out there run with this "bad geometry". Especially all the helis with their push-pull construction like a T-Rex 600 etc.

It should show you up that you won't use the complete servo throw - so the servo has a bit less force and precision than on a heli which is near 100/100.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless