VBar NEO for external transmitters
Helico helicopters with NEO that still fly without VBar Control
| Subject | Views | Posts | Last post |
|---|---|---|---|
| Windows 10 and NEO software, optimal resolution!? translated by Franky138 | Views: 0 | Posts: 4 |
4 March 2016 19:0604.03.2016 19:06 by RV |
| Neo flashes blue after update translated by bimbim328 | Views: 0 | Posts: 5 |
3 March 2016 22:1203.03.2016 22:12 by bimbim328 |
| Helic rotates at stick center translated by WillyWinky | Views: 0 | Posts: 8 |
3 March 2016 18:4103.03.2016 18:41 by RV |
| Package from satellite out of synchronization translated by Ronnsens | Views: 0 | Posts: 12 |
29 February 2016 08:3629.02.2016 08:36 by Eddi E. aus G. |
| crash - neo blinking red translated by ReadyToFly | Views: 0 | Posts: 4 |
26 February 2016 13:0426.02.2016 13:04 by ReadyToFly |
| Failsafe when routing from the gas channel to AUX3 translated by dit71 | Views: 0 | Posts: 6 |
25 February 2016 20:5625.02.2016 20:56 by dit71 |
| Graupner MZ-24 & Vbar Neo -- Wiring and Setup Questions translated by rasheem | Views: 0 | Posts: 4 |
25 February 2016 05:4125.02.2016 05:41 by RV |
| Rear noise / rear performance translated by pepekra | Views: 0 | Posts: 3 |
23 February 2016 17:5923.02.2016 17:59 by pepekra |
| Vbar NEO 6.1 Express without connection translated by Devil_IdT | Views: 0 | Posts: 8 |
21 February 2016 21:4521.02.2016 21:45 by RV |
| Backup battery on the NEO sensor plug translated by ikarus991 | Views: 0 | Posts: 3 |
20 February 2016 22:3820.02.2016 22:38 by ikarus991 |
| The rear end slowly turns away. translated by KKCE | Views: 0 | Posts: 12 |
19 February 2016 21:3119.02.2016 21:31 by RV |
| Vibration analysis and setup using an external transmitter via radio? translated by UdoP | Views: 0 | Posts: 3 |
18 February 2016 08:4418.02.2016 08:44 by Eddi E. aus G. |
| problem with paypal when trying to upgrade neo by ReadyToFly | Views: 0 | Posts: 4 |
17 February 2016 10:3117.02.2016 10:31 by Eddi E. aus G. |
| Behavior of Vstabi Neo Governor translated by ag83 | Views: 0 | Posts: 8 |
16 February 2016 20:2316.02.2016 20:23 by OliverK |
| How to correctly set helicopter size in software? translated by UdoP | Views: 0 | Posts: 2 |
15 February 2016 21:1715.02.2016 21:17 by RV |
| How to control servos via S-Bus? translated by Spacemarine | Views: 0 | Posts: 3 |
15 February 2016 00:3315.02.2016 00:33 by Spacemarine |
| Rescue & Jeti DC 16 translated by MarkusD | Views: 0 | Posts: 4 |
14 February 2016 13:2914.02.2016 13:29 by Fingolf |
| NEO does not initialize / Kosmik 200HV translated by ikarus991 | Views: 0 | Posts: 48 |
13 February 2016 23:2013.02.2016 23:20 by ikarus991 |
| Neo - Servo on CH2 is only rarely initialized translated by jsifly | Views: 0 | Posts: 29 |
12 February 2016 20:4912.02.2016 20:49 by jsifly |
| Setup: Servo travel on the Forza 700 translated by pepekra | Views: 0 | Posts: 22 |
9 February 2016 12:4509.02.2016 12:45 by Wolfram |
| New tail servo doesn't work on new VBAR Neo! translated by Luis1908 | Views: 0 | Posts: 7 |
7 February 2016 15:0607.02.2016 15:06 by RV |
| VBar Neo and Key file on Mac / PC translated by Andreas [S] | Views: 0 | Posts: 13 |
4 February 2016 08:0404.02.2016 08:04 by Andreas [S] |
| Base gas translated by OliP | Views: 0 | Posts: 3 |
3 February 2016 22:2903.02.2016 22:29 by OliP |
| Live vibration display - how to interpret the values? translated by tluckeneder | Views: 0 | Posts: 5 |
3 February 2016 13:2603.02.2016 13:26 by tluckeneder |
| Parameter Heli size translated by swalko | Views: 0 | Posts: 5 |
2 February 2016 11:1002.02.2016 11:10 by swalko |