VBar NEO for external transmitters
Helico helicopters with NEO that still fly without VBar Control
| Subject | Views | Posts | Last post |
|---|---|---|---|
| Tribunus with VBar control translated by ralwe | Views: 0 | Posts: 3 |
13 May 2019 17:3013.05.2019 17:30 by ralwe |
| Used VBar Neo: Register and program translated by Qualium | Views: 0 | Posts: 5 |
9 May 2019 08:5209.05.2019 08:52 by Eddi E. aus G. |
| Mikado VBar NEO Alu Housing translated by Haramon | Views: 0 | Posts: 2 |
9 May 2019 08:4909.05.2019 08:49 by Eddi E. aus G. |
| Question about the servos translated by smartrobert | Views: 0 | Posts: 4 |
8 May 2019 10:4808.05.2019 10:48 by smartrobert |
| Nick effect translated by hanspi | Views: 0 | Posts: 4 |
7 May 2019 22:2807.05.2019 22:28 by RV |
| Servo's swashplate don't move after update to pro version translated by 666yeti666 | Views: 0 | Posts: 6 |
6 May 2019 11:5406.05.2019 11:54 by 666yeti666 |
| Sensor Orientation Neo with External Sensor translated by 3dme | Views: 0 | Posts: 4 |
6 May 2019 11:1006.05.2019 11:10 by RV |
| VBar NEO - Rescue function translated by Warrior | Views: 0 | Posts: 14 |
6 May 2019 09:5106.05.2019 09:51 by Eddi E. aus G. |
| How to go to bailout autoratation in vbar neo express? translated by 666yeti666 | Views: 0 | Posts: 15 |
1 May 2019 21:4901.05.2019 21:49 by 666yeti666 |
| Tail servo jitters EC135 Fenestron translated by wmorf | Views: 0 | Posts: 5 |
30 April 2019 17:5330.04.2019 17:53 by RV |
| Vstabi V5 Setup applicable to Neo? translated by bimbim328 | Views: 0 | Posts: 3 |
25 April 2019 18:1625.04.2019 18:16 by bimbim328 |
| Lama PHT 2 with Neo translated by MarkusD | Views: 0 | Posts: 14 |
22 April 2019 14:0722.04.2019 14:07 by RV |
| Controller setup with external controller translated by wmorf | Views: 0 | Posts: 5 |
19 April 2019 09:4819.04.2019 09:48 by wmorf |
| RPM Governor translated by above | Views: 0 | Posts: 2 |
18 April 2019 08:4618.04.2019 08:46 by Eddi E. aus G. |
| Neo Setup File is not saved as vbr translated by UrsB | Views: 0 | Posts: 4 |
5 April 2019 13:3105.04.2019 13:31 by RV |
| Neo communication is not possible with Futaba R7008SB translated by Gleny001 | Views: 0 | Posts: 16 |
4 April 2019 10:0104.04.2019 10:01 by RV |
| Do not install rear servo translated by LimaBravo | Views: 0 | Posts: 9 |
2 April 2019 00:0302.04.2019 00:03 by RV |
| VBAR NEO setup with Jeti R3/RSW translated by joehagan | Views: 0 | Posts: 1 |
1 April 2019 22:5501.04.2019 22:55 by joehagan |
| Vbar Neo setup with YGE 90LV translated by MikeSteed | Views: 0 | Posts: 3 |
1 April 2019 19:1801.04.2019 19:18 by MikeSteed |
| Neo is flashing green red translated by belgo | Views: 0 | Posts: 3 |
25 March 2019 23:0525.03.2019 23:05 by RV |
| Main rotor optimizer translated by M@rtin | Views: 0 | Posts: 2 |
11 March 2019 06:4511.03.2019 06:45 by RV |
| Throttle via receiver translated by belgo | Views: 0 | Posts: 5 |
27 February 2019 20:2827.02.2019 20:28 by belgo |
| VBar crash, case and rescue translated by ReadyToFly | Views: 0 | Posts: 6 |
22 February 2019 16:2522.02.2019 16:25 by Eddi E. aus G. |
| Rescue function - how long does it run? translated by smartrobert | Views: 0 | Posts: 7 |
21 February 2019 14:2721.02.2019 14:27 by smartrobert |
| Question about Pro translated by rutra | Views: 0 | Posts: 8 |
20 February 2019 11:5020.02.2019 11:50 by rutra |