← VBar NEO for external transmitters

Sensor Orientation Neo with External Sensor translated

VBar › VBar NEO for external transmitters · Started by 3dme on 6 May 2019 07:4706.05.2019 07:47
3dme 6 May 2019 07:4706.05.2019 07:47
I have been searching for an answer before posting but I'm not finding a definite answer. My question is does the Neo and the external sensor have to be mounted in the same orientation. IE, both face up wires to the rear? Otherwise how would I select one orientation for the Neo (face up wire to the rear) and another orientation for the external sensor (face down wire to the rear. I am sure this has been covered before, but I'm having trouble finding it. Mike
Eddi E. aus G. 6 May 2019 09:5206.05.2019 09:52
Hi,

both can be configured separately, in the standard (smiley) and expert (doctor's hat) menus, in Setup/Sensor.

Kind regards

Eddi

Born to fly ...
forced to work.
3dme 6 May 2019 10:1306.05.2019 10:13
Can I do this from the Vcontrol or do I have to connect to a PC? I did not see where I could configure both when I did the set-up via Vcontrol.

Mike
RV 6 May 2019 11:1006.05.2019 11:10
Both sensor orientations (NEO /External) can be set up with a VBC or VBCt of course.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless