Good evening,
I've just updated my neo express to the professional version and everything went ok. Got confirmation in the "vbar control manager" :
Version: 6.3.359
vbar_pro_nonVL -- VBar Professional 6.3 Firmware - is current
So unplugged the power from the heli (=neo), removed the blue plug from the neo. Then powered the heli again and now all 3 servo's from the swashplate don't work anymore (tailservo is ok).
Checking with the regular neo software and everything seems ok, the applicable bars in the setup are moving as used to be, so the signals are still properly received from the Jeti receiver. It seems that the neo doesn't enable the signal onto the servo's.
Going back to the express version and all servo's are functioning properly again.
I must be doing something stupid I guess but uptill no I can't figure out what...
I've attached all banks from express and professional, so you can check it.
Thanks in advance!
regards
Sebastien
Dateianhänge:
öffnen | Download - logo700 all banks express and pro 1-5-2019.zip (3.1 KB)
I've just updated my neo express to the professional version and everything went ok. Got confirmation in the "vbar control manager" :
Version: 6.3.359
vbar_pro_nonVL -- VBar Professional 6.3 Firmware - is current
So unplugged the power from the heli (=neo), removed the blue plug from the neo. Then powered the heli again and now all 3 servo's from the swashplate don't work anymore (tailservo is ok).
Checking with the regular neo software and everything seems ok, the applicable bars in the setup are moving as used to be, so the signals are still properly received from the Jeti receiver. It seems that the neo doesn't enable the signal onto the servo's.
Going back to the express version and all servo's are functioning properly again.
I must be doing something stupid I guess but uptill no I can't figure out what...
I've attached all banks from express and professional, so you can check it.
Thanks in advance!
regards
Sebastien
Dateianhänge:
öffnen | Download - logo700 all banks express and pro 1-5-2019.zip (3.1 KB)