Hello I have a Jeti d24 and I am trying to setup a VBAR NEO with a R3/RSW using UDI. I have the R3/RSW setup in the radio as UDI and I have it set on 11ms (I have tryed all setting from 30ms to 5ms) when going to the NEO setup it shows no transmitter movement. I have the R3 hooked in port 3 and the NEO to aux 1. I spoke with the guys at Esprit and they helped me with the setup and checked that everything was working right we hooked up a servo right to the R3 and its working as it should. I spoke with the VBAR guy from Mikado use and he went through the setup with me and was not able to get it work either he said i should send you guys an email and see if you could help. Thank you
← VBar NEO for external transmitters
VBAR NEO setup with Jeti R3/RSW translated
VBar › VBar NEO for external transmitters ·
Started by joehagan on 1 April 2019 22:5501.04.2019 22:55
joehagan
1 April 2019 22:5501.04.2019 22:55