VBar NEO for external transmitters
Helico helicopters with NEO that still fly without VBar Control
| Subject | Views | Posts | Last post |
|---|---|---|---|
| Nitro Settings translated by Mike14755 | Views: 0 | Posts: 3 |
15 March 2017 18:1915.03.2017 18:19 by Mike14755 |
| Neo is not initializing; Imu sensor error!! translated by iggi-ix | Views: 0 | Posts: 11 |
15 March 2017 12:0515.03.2017 12:05 by Eddi E. aus G. |
| Neo and Turbine - MoBB Powercat translated by nurmalso | Views: 0 | Posts: 7 |
13 March 2017 19:1813.03.2017 19:18 by nurmalso |
| Vstabi NEO in an F3C mechanism, size 800 translated by flyhirobo | Views: 0 | Posts: 3 |
13 March 2017 13:5813.03.2017 13:58 by smg |
| New Vstabi Neo Express will not initialize, please help. translated by schumi360 | Views: 0 | Posts: 7 |
12 March 2017 10:0912.03.2017 10:09 by schumi360 |
| Neo Bank Copying with Trim Flight translated by remschneider | Views: 0 | Posts: 3 |
6 March 2017 12:5706.03.2017 12:57 by remschneider |
| Neo Express and DX8 translated by Uherold | Views: 0 | Posts: 3 |
6 March 2017 08:2806.03.2017 08:28 by Eddi E. aus G. |
| Disable connected external sensor in software translated by glushkov.andrew | Views: 0 | Posts: 2 |
4 March 2017 22:0904.03.2017 22:09 by RV |
| TM1000 Telemetry always in bind mode translated by marcelftw | Views: 0 | Posts: 9 |
3 March 2017 22:4503.03.2017 22:45 by marcelftw |
| Startup, speeds and external sensor translated by Speedmaster | Views: 0 | Posts: 6 |
2 March 2017 22:4702.03.2017 22:47 by RV |
| Vibrations within the normal range? translated by shredman | Views: 0 | Posts: 5 |
21 February 2017 08:5121.02.2017 08:51 by Eddi E. aus G. |
| possible to upgrade vbasic hardware? translated by cudaboy_71 | Views: 0 | Posts: 3 |
20 February 2017 08:5420.02.2017 08:54 by Eddi E. aus G. |
| Pitch adjustment translated by Mario 74 | Views: 0 | Posts: 3 |
18 February 2017 12:4118.02.2017 12:41 by Mario 74 |
| Questions about VBar Neo translated by Schma | Views: 0 | Posts: 70 |
18 February 2017 12:1218.02.2017 12:12 by HeliALEX |
| Why are there no email notifications in this subforum? translated by Schma | Views: 0 | Posts: 11 |
17 February 2017 08:1617.02.2017 08:16 by Schma |
| Neo Express on Futaba R7008 SBus translated by karlw | Views: 0 | Posts: 3 |
15 February 2017 11:4815.02.2017 11:48 by Eddi E. aus G. |
| VBar Neo - Problems with the "gas channel" translated by Helifan | Views: 0 | Posts: 16 |
11 February 2017 11:3311.02.2017 11:33 by DJBlue |
| Neo with JR XG11 translated by hanspi | Views: 0 | Posts: 4 |
6 February 2017 09:1006.02.2017 09:10 by Eddi E. aus G. |
| IMU sensor error - VBar Neo not initializing translated by Schiefer | Views: 0 | Posts: 3 |
4 February 2017 13:5404.02.2017 13:54 by Schiefer |
| Cycling ring value, is a value of 65 sufficient? translated by miro911 | Views: 0 | Posts: 2 |
3 February 2017 11:2303.02.2017 11:23 by RV |
| VBar Neo bindes not translated by Harkonne | Views: 0 | Posts: 23 |
31 January 2017 16:4331.01.2017 16:43 by Eddi E. aus G. |
| Servo Throw translated by Mike14755 | Views: 0 | Posts: 2 |
27 January 2017 23:4327.01.2017 23:43 by RV |
| Looking for the Vbar Control installation folder? translated by Raptormario | Views: 0 | Posts: 4 |
26 January 2017 20:0326.01.2017 20:03 by RV |
| Neo with Fenestron translated by thzi | Views: 0 | Posts: 8 |
26 January 2017 17:1726.01.2017 17:17 by thzi |
| 2 Vstabi Neo on PC Windows 10 translated by hotzi99 | Views: 0 | Posts: 5 |
24 January 2017 15:3524.01.2017 15:35 by RV |