← VBar NEO for external transmitters

Servo Throw translated

VBar › VBar NEO for external transmitters · Started by Mike14755 on 27 January 2017 22:4227.01.2017 22:42
Mike14755 27 January 2017 22:4227.01.2017 22:42
V-Bar Neo, DS X Satellites, DX8 Tx, Align Trex 600n
Working through the setup I have a problem when I get to the setting Collective throw. I am trying to achieve a +/-12 degrees the only way I can achieve this is with the slider at it its minimum position (60) the setup states it should be in the range 80 - 100 so will it make any difference to way the heli flies or do I have change all the servo horns.
RV 27 January 2017 23:4327.01.2017 23:43
Well - often asked ... it is just one of newtons law ;-)

You may keep it this way - but will cost you servo force and resolution (precision). If you might have a chance to get shorter horns . it would be worth a try.

Here is mine - maybe it will help you ...

http://www.vstabi.info/forum/read.php?20,77697

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless