← VBar NEO for external transmitters

Disable connected external sensor in software translated

VBar › VBar NEO for external transmitters · Started by glushkov.andrew on 4 March 2017 21:5904.03.2017 21:59
glushkov.andrew 4 March 2017 21:5904.03.2017 21:59
I have Vbar NEO installed on my Goblin 770. External sensor installed, connected to the main unit, but disabled in software in "Sensor" tab (see screenshot attached).
But in NEO log I see message "External sensor data available and used". What type of sensor used actually? As far I can understand, if second sensor disabled, only internal sensor should be used, but what about this message in log?

RV 4 March 2017 22:0904.03.2017 22:09
Simple check to be sure: Tip on the sensor / NEO and watch the servos.

It is as configured - the message in the log seem to be wrong ;-(

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless