Mike14755
13 March 2017 18:3013.03.2017 18:30
Align Trex 600n
When you select engine run the spool up is very hard I have set the parameter "Run Up Speed" to 3 but it dose not make much difference to spool up speed what settings are other people using ?
RV
13 March 2017 19:2013.03.2017 19:20
I am using 2 or 3 - and it works.
Try 2 - it is a bit slower.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Mike14755
15 March 2017 18:1915.03.2017 18:19
Thanks
I'm try that tomorrow.