VBar NEO for external transmitters
Helico helicopters with NEO that still fly without VBar Control
| Subject | Views | Posts | Last post |
|---|---|---|---|
| Rear servo problem translated by jofly_48 | Views: 0 | Posts: 21 |
23 August 2018 23:1123.08.2018 23:11 by jofly_48 |
| Self-centering at the rear? translated by AG | Views: 0 | Posts: 7 |
21 August 2018 15:0921.08.2018 15:09 by ikarus991 |
| vbar neon stop translated by RDouro | Views: 0 | Posts: 2 |
21 August 2018 07:5321.08.2018 07:53 by RV |
| vbar neon with futaba14SG translated by RDouro | Views: 0 | Posts: 1 |
19 August 2018 12:4719.08.2018 12:47 by RDouro |
| No negative pitch after 2/3 stick travel translated by AG | Views: 0 | Posts: 7 |
14 August 2018 15:0814.08.2018 15:08 by AG |
| What settings are needed for F3C hovering? translated by AG | Views: 0 | Posts: 11 |
13 August 2018 21:5113.08.2018 21:51 by Runarsk |
| Setup vstabi neo translated by Rudi71 | Views: 0 | Posts: 3 |
3 August 2018 20:5303.08.2018 20:53 by Rudi71 |
| Each update cannot be unlocked. translated by bones7 | Views: 0 | Posts: 4 |
30 July 2018 09:2230.07.2018 09:22 by bones7 |
| Brand new Neo, no signal to servos after registration translated by z-speed | Views: 0 | Posts: 7 |
30 July 2018 08:5430.07.2018 08:54 by Eddi E. aus G. |
| HOW CAN I SETTING BANK4 ? (USE FUTABA 18SZ) by leonchen | Views: 0 | Posts: 4 |
29 July 2018 10:4729.07.2018 10:47 by Vetequk |
| VBar Setup App is cut off. translated by fabfour | Views: 0 | Posts: 3 |
23 July 2018 21:1923.07.2018 21:19 by fabfour |
| Autotrim, cannot enable it on one of my Neo's translated by PMFH | Views: 0 | Posts: 8 |
10 July 2018 23:1010.07.2018 23:10 by RV |
| Convert from NEO Vlink to NEO Vbar (Futaba Sbus version) translated by perno | Views: 0 | Posts: 3 |
9 July 2018 21:3709.07.2018 21:37 by perno |
| Adjust helicopter size translated by Franz Ladurner | Views: 0 | Posts: 3 |
9 July 2018 21:3609.07.2018 21:36 by Franz Ladurner |
| Setting the tail servo type translated by Franz Ladurner | Views: 0 | Posts: 2 |
5 July 2018 14:1905.07.2018 14:19 by Fingolf |
| Vstabi Neo initialization problem translated by Christoph68 | Views: 0 | Posts: 15 |
5 July 2018 11:3305.07.2018 11:33 by Christoph68 |
| vbar neo and tail gain on 14sg translated by ReadyToFly | Views: 0 | Posts: 7 |
3 July 2018 19:4603.07.2018 19:46 by RV |
| Nitro Setup in Neo 6.x with Futaba 14SG translated by PMFH | Views: 0 | Posts: 1 |
27 June 2018 08:4927.06.2018 08:49 by PMFH |
| Vstabi Neo with external controller translated by Jan Emser | Views: 0 | Posts: 8 |
21 June 2018 07:3321.06.2018 07:33 by RV |
| Vstabi Neo with normal receiver translated by MrHeli33 | Views: 0 | Posts: 4 |
18 June 2018 13:3518.06.2018 13:35 by Eddi E. aus G. |
| VBAR Neo Spektrum Throttle Nitro issue translated by tipspeed | Views: 0 | Posts: 3 |
14 June 2018 00:3714.06.2018 00:37 by tipspeed |
| Vstabi NEO reads MAC serial number translated by MacMan | Views: 0 | Posts: 3 |
12 June 2018 09:2812.06.2018 09:28 by Eddi E. aus G. |
| NEO SETUP GUI TEXT translated by leonchen | Views: 0 | Posts: 10 |
10 June 2018 14:4210.06.2018 14:42 by leonchen |
| Delete Neo from database translated by eddy62 | Views: 0 | Posts: 2 |
7 June 2018 12:4907.06.2018 12:49 by Fingolf |
| Neo with 2M turbine helicopter translated by 3dchris | Views: 0 | Posts: 4 |
1 June 2018 14:3101.06.2018 14:31 by Eddi E. aus G. |