← VBar NEO for external transmitters

Convert from NEO Vlink to NEO Vbar (Futaba Sbus version) translated

VBar › VBar NEO for external transmitters · Started by perno on 8 July 2018 22:4908.07.2018 22:49
perno 8 July 2018 22:4908.07.2018 22:49
Hi

I have two NEO Vlink units #04949 one unused with Express and the other upgraded to PRO version.

I now plan to use one NEO unit in my F3C heli in combination with FUTABA T18SZ and Sbus.

- I expect NEO rx need to be disabled and the dual antenna to be removed.
- What steps to do if possible ? sw. upgrade / downgrade ?
- Will PRO version continue to work after necessary conversion to Vbar ?

- Is it possible to revert back to the original NEO Vlink version after downgraded to NEO Vbar version?
- I assume NEO Vbar setup will be done from my PC as in old Vbar days.

Best regards
Per
RV 9 July 2018 09:1109.07.2018 09:11
Just do nothing. Just connet the s.bus rx and set it up according to the manual with Pc or (pro) Vbar Control like in my videos about Buddyboxing.

If no Vbc is turned on it will connect with the Futaba. If Vbc is on and the Neo is not in bind mode, it will connect with both and futaba is the Student. You can also unbind VBC to avoid this if not wanted.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
perno 9 July 2018 21:3709.07.2018 21:37
Great news.

Then I will start test the setup on the bench.

Thanks Rainer
VStabi VStabi Pioneer of Flybarless