← VBar NEO for external transmitters

What settings are needed for F3C hovering? translated

VBar › VBar NEO for external transmitters · Started by AG on 22 July 2018 19:2822.07.2018 19:28
AG 22 July 2018 19:2822.07.2018 19:28
Hallo,

gibt es eine Anleitung welche Einstellungen für F3C Schwebeflug optimiert werden sollen ? Also z.B. Style rauf auf 120 (?), Wendigkeit runter nach Geschmack, usw. ?
ulrich 23 July 2018 12:0723.07.2018 12:07
Eine generelle Anleitung gibts nicht, denn das ist alles sehr abhängig von den persönlichen Empfinden.

Man kann den Schwebeflug deutlich verbessern, wenn der Integral Anteil (Experten Hauptrotor) erhöht wird. Man kann das bei F3C recht weit treiben, bis der Heli das Schaukeln anfängt. Der Heli hängt dann etwas ruhiger unterm Rotor.

Style und Empfindlichkeit ist sehr persönlich, ich hab schon alle extreme bei F3Clern gesehen. Ich würde nicht zu hohe Empfindlichkeit wählen, wei man dann bessere Feinkontrolle beim Schweben hat.

Sehr vorteilhaft dürfte auch ein hoher Optimizer Wert sein. Zusätzlich eventuell ordentlich Expo und ein reduzierte Wendigkeit (reduzierte Wege).

Das nur mal so als grundlegende Idee, ich hab nur recht wenig Feedback von F3Clern, man probiert viel aus, aber es wird zumindest hier nur sehr wenig preisgegeben ;-)

so long ... Uli
http://www.vstabi.de
AG 23 July 2018 14:0023.07.2018 14:00
Danke Uli,

bei einem anderen System wird empfohlen DMA-Pitch und DMA-zyklisch auf Null zu setzen und die Aufbäumkompensation zu deaktivieren. Macht das Sinn ?
RV 23 July 2018 16:1323.07.2018 16:13
Ganz einfach:

Austesten. Mit der VBar Control ist das doch in 1 Minute mit einer Zwischenlandung getestet.

Für konstante Pitchwerte könnte es ev. etwas besser sein, aber für wechselnde Pitchwerte garantiert nicht.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Eddi E. aus G. 24 July 2018 09:4924.07.2018 09:49
Hi,

es gibt noch einen anderen Ansatz, der aber erfordert, sich etwas genauer mit der Thematik zu befassen, weil man damit grundlegend in die Regelung eingreift:

Wir setzen ja den Parameter für zyklisch, zur Kalibrierung, auf 8°. Das ist praktisch eine Verstärkung oder ein Faktor, der auf alles im Hauptrotor-Regelkreis wirkt.

Wenn man den z. B. auf 9° oder 10° setzen _würde_, würde man alle Parameter und Wirkungen um 12,5-25 % vergrößern.
Bedeutet, 'man müsste', um das selbe Flugverhalten wie vorher zu erreichen, z. B. die Empfindlichkeit, den Style, die Wendigkeit, die Optimiererwerte um den Prozentwert reduzieren. Also alle Parameter, die man eben nicht verstärkt haben möchte.

Wenn man bspw. mit Empfindlichkeit und Style schon bei Maximum wäre (für's Schweben), könnte man so noch weiteren Hubraum rausholen.

Aber ACHTUNG: erst mal mit Bankumschaltung arbeiten, Grundwerte reduzieren, so dass man für die Fahrtflugphasen gerüstet ist, dann kann man in der Schwebe-Flugphase spielen und zur Not (Aufschwingen wenn zu viel) auf eine sichere Bank setzen, sozusagen.
Und noch ein ACHTUNG: den Trimmflug sollte man mit einem normalen Setup machen.
Und ein letztes ACHTUNG: keine Ahnung, wie sich das auf die Rettung auswirkt, never tried.

Hier ein wenig Feedback von einem Kunden aus Schweden:

Quote:BH
Hi Edward! I must say, you are the man.. ???? My 2 Urukay's are better than ever, like 2 new helicopters... I try different setups today and I was really happy with 9.2° Cyclic, I could increase the parameters that I want and it really change the helicopter, most in hover but it was better in flight to. Im so happy that you helpt me! It was really good befor but now its f?????g awesome! ???????????? Big thanks!

Quote:BH
Hi Edward! Yes Im really happy, was out today on the field and get 17 flights with tweek and pure fun... My helicopters is perfect with your help... :-) Offcourse I will give you my setup file, I will send it to you tomorrow and try to write something about my setup.. I setup cyclic 9.2 and try from 9 to 10 but with 9.2° I could maximum gain without vibration and occillation... I email you tomorrow night with a better answer... :-) My english is not the best... Hope you understand something of it... ????

Quote:BH
Hello Edward! I will now try to explain a little about how I feel.. First of all, the heli is much more stable, in hard wind it feels more locked in and not so "jumpy". I setup cyclic to 9.2 and I could increase gain to 120 on main and tail, allso I & P gain to 120. I feel like the heli is more direct in hover and I could decrese AFR D/R from 35 to 30% in hover with better feeling in hover. Played today on the field with more expo and I increased it 10% to 70 on ail & elev. Dont know if this is becuse the cyclic change but it was a better feeling anyway... ???? I could increase main optimizer in hover and flight with better feeling than before. Its hard for me to explain exacly how I feel the heli more than its much better, stable and quicker, even in flight its a little better, quicker in rolls... This was a good improvment for me and neo. You have the best gyro, Im so happy with it. Maybe in the future its posible to increase integral... ????

Und zum I noch von mir:

Quote:EE
thank you for your feedback. I is also increased by increasing the cyclic gain, so if you leave it where it was, it will be more than before. As being said, the cyclic gain is a factor which affects all the parameters inside the equation, if you want to put it that way.

Hoffe, das hilft :-)

Uli oder Rainer mögen gern korrigieren, das ist entstanden aus den Erkenntnissen eines F3C-Meetings vor über einem Jahr, und 2. Hand, da ich nicht dabei war.

Grüßle

Eddi

Born to fly ...
forced to work.
Runarsk 8 August 2018 14:0808.08.2018 14:08
Hi

Can you please translate to English ????
Eddi E. aus G. 8 August 2018 15:1808.08.2018 15:18
Hi,

the original conversation was in English:

Quote:EE
what you can try has been discussed at a F3C training day here in Germany recently, it's to increase the cyclic angles (not to 8° but to say 9 or 10°).
BUT (capitals because IMPORTANT) you have to reduce the other parameters like main rotor agility and gain percentage wise (with 10° you have 25 % more cyclic gain so in turn you would have to reduce main rotor agility and main rotor gain by at least 25 %, to avoid bad effects like oscillation.

Try this in a separate bank and be prepared to switch to a normal bank if you find anything untoward.
ONLY USE more standard settings for P and I for this test, if it works without issues you can again try and increase the other values to see how far you can go.

The cyclic value in the setup is the overall factor to control and stabilization inputs, so if you look at it as an equation, if you increase that factor you have to reduce the values inside the brackets acordingly. But since this value acts pretty aggressively, it can help with precision.
For big air maneuvers, you would probably choose a more conventional setup.

In general, all parameters which you do _not_ want to be amplified, please reduce them.

One more thing: you would also want to reduce the optimizer values in this case, by the percentage you increase the cyclic value.
And the changes you made could also affect the control loop during the trim flight. I would recommend you do the trim flight with a standard setup, write down the values, load the modified setup and enter the trim flight values manually.


Messing with the cyclic gain parameter is very strong magic, so make sure you understand what you are doing, and better approach from the safe side than overdo it right away :-) in a hover, with only slight and slow inputs, an increase of the parameters will help, and there is little chance of bad oscillations. But if you try hard flying or even only normal aerobatic maneuvers, it can happen, this is why we recommend to set up a safe bank (or banks), or banks for big air aerobatics, and only increase the parameters you did decrease at the time you increased the cyclic gain, in a hovering bank. Savvy? :-)

Kind regards

Eddi

Born to fly ...
forced to work.
Runarsk 8 August 2018 15:5508.08.2018 15:55
Savvy :-)

I changed servos on the swash of my Urukay yesterday and could hardly reach 7° cyclic with them. I'll definitely move the links out on the servo horns and try your method.



1 mal bearbeitet. Zuletzt am 08.08.2018 15:55 von Runarsk.
Runarsk 13 August 2018 16:2013.08.2018 16:20
It's definitely wort trying :-)

I moved the links out and tried 9° with the same settings as I had before. The feeling is much more locked in and precise.
Eddi E. aus G. 13 August 2018 16:2713.08.2018 16:27
Ah ... links?

Please elaborate? What changes did you make otherwise?

Cheers

Eddi

Born to fly ...
forced to work.
Runarsk 13 August 2018 21:5113.08.2018 21:51
I changed to new MKS hbl 960 servos and they didn't give the same throw as the old Align ones. I lengthened the servo horn to the outer hole to correct this and now I can achieve about 9.5° in the cyclic setup.

I tried 9°, lowered the gain and integral on one bank for the first try, but soon realized using the old values didn't give any oscillations.

No other changes were made, just flying to get used to the different feel.
VStabi VStabi Pioneer of Flybarless