← VBar NEO for external transmitters

help with neo gov. translated

VBar › VBar NEO for external transmitters · Started by joecass on 28 September 2016 02:1428.09.2016 02:14
RV 8 October 2016 12:5208.10.2016 12:52
One simple trick:

- disconnect RPM Sensor and set up all values (Basic throttle and adds) manually first.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
joecass 8 October 2016 13:3808.10.2016 13:38
Ok thanks I'm going to do that for all banks? The head speed drops really really low doring tic toc seems like it will take one hard collective move but then the second one the head speed really drops low.
RV 9 October 2016 21:5209.10.2016 21:52
Well - do it for the favourite bank. But keep sure you have not eneabled this bank for "direct throttle" ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
joecass 9 October 2016 22:3609.10.2016 22:36
Ok thank you. I'm going to give that a try I hope I can get this thing going
joecass 11 October 2016 01:0311.10.2016 01:03
Ok so I unplugged the RPM sensor and at 30 basic 25 collective add 30 I got 1900 for head speed so I plugged in the RPM sensor the head speed went down to 1600 and in the middle of the flight came up to 1700. I landed it and plugged my futaba telemetry RPM sensor that has the pick up magnet in the main gear instead of using magneto. This worked the head speed is holding at 1900. I had to set gear ratio to 1 in gov set up menu. I lowered the low throttle limit to a more normal Setting of 15. I'm still getting gov at low throttle limit in the log but the gov turns on. The only problem now is i get a rev and tail kick every 30 seconds or so only with the gov on. I tried lowering the gain from 70 to 20 it dose it a lot less at 20 but still there. What can I do to fix that?

Is it ok to get the gov Signal from the main gear? Is that just as accurate as getting the RPM Signal from the engine?
RV 11 October 2016 17:5911.10.2016 17:59
Ok - is there any kind of log entry while the kicks appear?

About the rpm - it is best to pick up as many pulses as possible. So - a sensor at the gear (i assume main shaft) with only 1 pulse/rpm is possible, but not best for accuracy. Anyway - if it works i would keep it ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
joecass 12 October 2016 10:2112.10.2016 10:21
No just low throttle limit is in the log. It doesn't mater were I run this value I always have the low throttle limit stored in the log. I noticed that if I raise the low throttle limit up to 35 it stops kicking and revving.

So I have the gain at 20 and low limit at 35 and it is flying ok. Do you know why I have to run such a high low limit value? Also do you think I should try and run a higher gain value?
RV 12 October 2016 21:3112.10.2016 21:31
Ok - if the low limit "Limits" now too much (as it seem) to avoid kicks - the reasons must be:

- too much collective ad (has effects here)
- rpm signaling partial wrongly

If this values are dialed in right:

- basic throttle
- collective ad

It must be a RPM detection issue.

So - how much basic throttle and collective ad ist set up now?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
joecass 13 October 2016 09:5413.10.2016 09:54
Basic throttle 28
Collective add 25
Minimum throttle 35
RV 13 October 2016 18:2413.10.2016 18:24
Ok - so there is something wrong. The throttle is now limited by the Min limit at zero - and not by the basic throttle. Please take a look at the images linked above ;-)

So - at all - the basic throttle seems to be too low for aunregulated HS at zero collective.

I would set:

Min throttle to 30
Basic to 38
Collective ad to 23

And give it a try.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
joecass 13 October 2016 20:0113.10.2016 20:01
I just got back from flying. I moved my RPM sensor from the main gear to a better spot on the magneto. I set my low throttle limit to 15 and the gov came on also for the first time I no longer have any low throttle limit logs.

The only thing now is after loading the engine and then come of of it the head speed is a bout 50 to 60 RPM higher than the taget head speed. Should I lower the low throttle limit to 10?

If im running a head speed of 1950 after doing tic toc or continuous flips when I go back to hover the head speed is 2010 for a little bit then seems to settles back down.
RV 13 October 2016 20:5113.10.2016 20:51
Ok - well 2 theories:

Eitehr the min limit is too high - or - the throttle curve too flat. I would increase the collective ad 5 pojnts first and retry.

On a nitro - it is almost useful to accept a bit overspeeding due unloading maneuvres to get more punch for the next load on teh system ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
joecass 14 October 2016 03:4614.10.2016 03:46
I tried reducing the low limit to 10 but it did not help. I'm going to try and move collective ad 5 points up and retest.
Do you think this could be caused by a faulty RPM sensor signal? I'm only asking because that's been such a problem so far.
joecass 17 October 2016 00:2717.10.2016 00:27
So I installed a stater gator as per the instructions on this site using a 5 volt regulator. It works good but still over speeding so I raised up collective ad 5 points. This helped a lot. Can I go up 5 more points on collective add? What would be the negative effect of running to much collective add? Its pretty good now. If I can just bring the over speeding down a little more that would be grate if not I can live with it. Thanks for all the help
RV 17 October 2016 09:2217.10.2016 09:22
Ok, give 5 more ...

The only side effect may be overspeeding in climbouts. So as long as these aren't present ...

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




2 mal bearbeitet. Zuletzt am 17.10.2016 09:22 von RV.
VStabi VStabi Pioneer of Flybarless