← Cafe

VBackup and Macrocells translated

Public Talk › Cafe · Started by JMalberg on 31 May 2026 10:4031.05.2026 10:40
JMalberg 31 May 2026 10:4031.05.2026 10:40
Hey everyone,

I would like to control functions using the power backup. For example, I want to switch on a light under certain conditions, or something similar.

I've searched high and low, but I can't find any information about the TM initial states/status and their use in macrocells.
I've seen this somewhere before, but I couldn't find anything about it in the user manual or in the macrocells themselves.

Regards, Jürgen
(Here are the missing commas for free use in my posts: ,,,,,,,,, )



Edited 1 time(s). Last edit at 05/31/2026 09:15PM by JMalberg.
machine-translated from German · Show original
RV 31 May 2026 13:1131.05.2026 13:11
If you assign VBack Info and Volt to each channel cell and then "test" the different states and look at the output in the MC overview...

But I asked Uli...

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
ulrich 31 May 2026 16:3931.05.2026 16:39
There are the cells "VBackup Volt" and "VBackup Info", located right after the trims.

VBackup Volt (capacitor voltage):
-100% = 0V
-50% = 2.5V
0% = 5V
50% = 7.5V
100% = 10V

VBackup Info:
-100% : Not Connected
-50%: Not Ready
0% : Minimum voltage reached (start enabled)
+50%: Ready/Online
+100%: Emergency power active

We need to add that to the documentary.

So long... Uli
http://www.vstabi.de



Edited 1 time(s). Last edit at 05/31/2026 04:40PM by ulrich.
machine-translated from German · Show original
JMalberg 31 May 2026 21:1531.05.2026 21:15
Thanks! :-)


I've changed the subject to VBackup. :-)
I was on the wrong track when I created this. :-) :-/

Regards, Jürgen
(Here are the missing commas for free use in my posts: ,,,,,,,,, )



Edited 1 time(s). Last edit at 05/31/2026 09:15PM by JMalberg.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless