← Logo 700 and 800

Spare parts stock for 800 XXtreme… and Logo 600? translated

Mikado Model Helicopters › Logo 700 and 800 · Started by NAVRA on 2 February 2026 13:3302.02.2026 13:33
NAVRA 2 February 2026 13:3302.02.2026 13:33
Good day and best regards to the Mikado team. I hope you are all well.

I am writing this email after trying to contact Mikado by email for several months without receiving any response. I hope someone here can help me.

Having flown helicopters since childhood, I took a break for many years due to moving house and the distance from my home. Now, as an adult, I've decided to take up this hobby again and fly my Logo 600 SX once more. In addition, I was able to acquire a nearly new 800 XXtreme – a helicopter I've always dreamed of since childhood and which is now very hard to find.

As a lover of this hobby and especially of the Mikado brand, it saddens me to see how difficult it has become to obtain spare parts, and I worry about the future of our helicopters.

Does anyone know if the missing parts for the 800 XXtreme will ever be back in stock? Will canopy kits be available again?

And regarding the Logo 600 SX: Will parts 04620 and the belt ever be available again?

I'm not exactly sure why, but on my Logo 600 SX – which is mechanically in perfect condition and flies absolutely flawlessly, buttery smooth with its original carbon frame – the main shaft keeps bending after a certain number of flights. Because of this, I'd like to buy several to have on hand. Is there a known solution for this?

Thank you all so much.

Best regards
Rafael
machine-translated from German · Show original
Eddi E. aus G. 2 February 2026 14:5102.02.2026 14:51
Hello Rafael,

thank you very much.

Where did the emails go?
If in doubt, please try service (at) mikado-heli (dot) de.

The 800 XXtreme (from 2012) was already replaced by the current LOGO 800 in 2019.
Due to the current weak demand for the XXtreme, I don't think anything more will be released for the 800 XXtreme (or 700 XXtreme) :-/
The LOGO 800, on the other hand, as the big brother of the LOGO 700, is supposed to come back.

We are actually very close to launching the new LOGO 700, and in parallel, the LOGO 580 (550 SE-600 SX size, but with a 6s drive as standard). With the 580, spare parts that fit the 550 to 600 will also become available again.
In some places, modifications will be necessary because the 580 gets a different rear belt and comes standard with the 25 mm rear end from the 600 (as opposed to the 22 mm rear end of the 550-/SE).
Of course, with a suitable drive set, it will also be possible to fly it with light 10-12s batteries as before (8s is quite popular now...), but officially it will be a 6s helicopter, it seems.

The 500-600 carbon chassis, however, is also a relic from earlier times and never really caught on; in my opinion, it is too complex, too heavy, and too expensive to maintain. The plastic chassis weighs a fraction of the weight, consists essentially of two parts, and appears stiffer overall.
To what extent the 580 parts will fit into the carbon chassis remains to be seen... with some model-making effort, many things are possible, but I don't want to promise anything.

Viele Grüße!

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
NAVRA 2 February 2026 15:0902.02.2026 15:09
Thank you so much for the detailed and quick reply, Eddi!

My emails were sent to the address that begins with "info". Perhaps that's the problem, even though I received the confirmation email. However, your answer here is more than sufficient.

Regarding what you wrote to me, I would like to ask two things:

1. So, basically, there will be no more spare parts available for the Logo 600SX? That's a shame, as there are many of us who want to preserve it and are specifically looking for the main shaft 04620.

2. Even though it doesn't have reinforcements for the "second stabilizer", could you confirm whether the vertical rear stabilizer of the Logo 800 is compatible with the Logo 800 XXtreme?

In conclusion, I'd like to say that it's true the carbon chassis of the Logo 600 comes from a completely different era, when the RC helicopter world was booming and everyone wanted a bigger, more beautiful, and fully equipped helicopter. This included carbon canopies. Nonsense, in my opinion… Back then there were videos, competitions, beach events like "Smack Down on the Beach"... It's a shame that all that is over, but how wonderful it was to experience it when I was around 14 years old. The carbon chassis was never something I particularly wanted; I simply bought an old mechanics set with it back then to have spare parts, and I've maintained it ever since. The fact that the shafts bend on the SX head version is truly very unusual. In all these years, I haven't found an explanation for it.

Regarding the XXtreme 800: It's simply massive. A joy to watch it fly. Should it ever break down, I don't think any other helicopter will give me as much pleasure, even if I buy a current Logo 800 as a replacement.

With that, I wish you a nice day and thank you again for your help.
machine-translated from German · Show original
Eddi E. aus G. 2 February 2026 15:3902.02.2026 15:39
Hi,

1. The shaft from the 580 will also fit the 550-SE-600-SX; depending on your original setup, you might need to adjust the linkage. I mean, some people might still be using the longer shaft and the two-piece rotor head, or—if you look at a model series over almost 20 years, there have been quite a few intermediate and evolutionary steps :-)
In case of doubt, a replacement for the rear drive will then mean pulleys and small parts.

2. Phew... that's what I want... I'd probably have to see if I can find another one from the 800 XX somewhere, and compare the hole pattern.
Gut feeling... probably not.

Yes, the XX were definitely 'awesome' :-) no question. Maybe a tad over-the-top ^^

If in doubt, one could always try to find used parts or a used helicopter as a spare parts depot, just like many RC car fans do for their now 'classic' cars :-) with which they (we, me too) used to race.
Even that part of the hobby isn't what it used to be ^^

Gladly, and likewise.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless