← VBar Control Classic

Vbar Control touch WLAN remains stuck during initialization translated

VBar Control › VBar Control Classic · Started by colorcopy12 on 23 December 2025 13:3923.12.2025 13:39
colorcopy12 23 December 2025 13:3923.12.2025 13:39
Hello everyone,
After many years with my Vbar control classic, I treated myself to a used Control touch for Christmas.
Unfortunately, I cannot connect to Wi-Fi; the display always remains at initialization, and even manually stopping or starting it does not help.
Unfortunately, updating via USB didn't change anything either.
I've also uploaded a picture of the screen.
Do you have any other tips for me?
Kind regards
Michael

machine-translated from German · Show original
RV 23 December 2025 14:0723.12.2025 14:07
What is the serial number of the system?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
colorcopy12 23 December 2025 14:5723.12.2025 14:57
Hello Rainer,
The serial number is 11003644.
Kind regards
Michael
machine-translated from German · Show original
RV 23 December 2025 16:1223.12.2025 16:12
What happens if you try to connect to the Wi-Fi later via the system menu? Does a list of Wi-Fi networks appear there?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
colorcopy12 23 December 2025 18:2323.12.2025 18:23
I tried that too, but unfortunately it doesn't change anything; it gets stuck at the initialization stage.

machine-translated from German · Show original
RV 23 December 2025 18:5223.12.2025 18:52
Did you also connect to the Wi-Fi network beforehand on the main screen, including the password, etc.?

Click on the Wi-Fi symbol there and connect (click on the network and enter the password) ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 23.12.2025 18:52 von RV.

machine-translated from German · Show original
colorcopy12 23 December 2025 19:1523.12.2025 19:15
I've already tried that, but no networks are displayed here either, only the initialization symbol, and the same happens when I tap it. Besides the Fritz!Box, I've tried tethering with an iPhone, an Android phone, and an LTE router (all 2.4 GHz compatible). Is there a hard reset option?
I can't get any further using the Welcome App either, since it also requires Wi-Fi.

machine-translated from German · Show original
RV 23 December 2025 20:4323.12.2025 20:43
Okay - then do the following:

- Connect via USB, start USB mode
- Start the Manager Tool, go to the shop
- Toggle to EN to
- Wait until everything is finished
- try it in EN

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
colorcopy12 24 December 2025 10:1624.12.2025 10:16
So, I connected the touchscreen via USB and switched to EN in the shop.
The result is the same, it just now says "Initializing".
I could cry, is the Wi-Fi module probably defective?
The question is whether it's worth it; perhaps I should return them.

machine-translated from German · Show original
RV 24 December 2025 12:1124.12.2025 12:11
Try deleting the wifi.dat file from the /sys folder and then try again. It might be corrupted. Please manually enter /sys in Explorer to do this ;-)


Otherwise ....




Please create a service case for this VBC.

To do this, log in to vstabi.info and navigate to your device list (bottom left). Click on the service icon next to the relevant device.

Please fill out the form (first contact details, then a description of the problem). You can also attach images, logs, etc. If it's a warranty claim, please upload your purchase invoice.

After submitting the form, a confirmation email will be sent automatically.

Our service will then contact you via email as soon as possible.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 24.12.2025 12:17 von RV.

machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless