Hello,
Just a question about the coach.
Yesterday I wanted to do a training session again and, for my birthday, I simply allowed myself the time to finally do it again.
So I packed everything up, and because I'm still not entirely sure about my Touch Control, which I was able to port to the trainer thanks to your help, I used the original controls. The wind was reported as 3.5 m/s, but it was also gusty, probably twice that.
Because of other flight operations, the helicopter was set to 4x8m, so I was practicing at about 5-6m height and suddenly the helicopter took off.
I lost control of it, my model airplane buddies weren't quick enough to get there, and the helicopter crashed somewhere in a rye field. I couldn't find it yesterday; after three-quarters of an hour, six of us called off the search for the time being.
Today I'm buying a used camera drone and we won't give up the search.
Is it possible that a strong gust of wind pushed the small helicopter out of the ultrasonic cone, making it uncontrollable? I think I also loaded the rescue function for stabilization onto the receiver when transferring the settings to the larger controller. I'm not entirely sure, but it didn't work. I've had lessons at a flight school and I can usually hover and recover the helicopter to a certain extent. But nothing worked. I also thought that maybe I could make a noise with the tail rotor running to make it easier to locate. That didn't work. Nevertheless, the battery voltage was showing as dropping relatively quickly, as if there was a load on it. It's all a bit puzzling to me. But perhaps someone here knows what I should pay attention to when I get it back. Alternatively, I bought an OMP2 before the trainer. Is there a way to buy a retrofit kit to convert it to a trainer?
I'm curious if you can broaden my understanding of this disaster and financial bankruptcy.
Just a question about the coach.
Yesterday I wanted to do a training session again and, for my birthday, I simply allowed myself the time to finally do it again.
So I packed everything up, and because I'm still not entirely sure about my Touch Control, which I was able to port to the trainer thanks to your help, I used the original controls. The wind was reported as 3.5 m/s, but it was also gusty, probably twice that.
Because of other flight operations, the helicopter was set to 4x8m, so I was practicing at about 5-6m height and suddenly the helicopter took off.
I lost control of it, my model airplane buddies weren't quick enough to get there, and the helicopter crashed somewhere in a rye field. I couldn't find it yesterday; after three-quarters of an hour, six of us called off the search for the time being.
Today I'm buying a used camera drone and we won't give up the search.
Is it possible that a strong gust of wind pushed the small helicopter out of the ultrasonic cone, making it uncontrollable? I think I also loaded the rescue function for stabilization onto the receiver when transferring the settings to the larger controller. I'm not entirely sure, but it didn't work. I've had lessons at a flight school and I can usually hover and recover the helicopter to a certain extent. But nothing worked. I also thought that maybe I could make a noise with the tail rotor running to make it easier to locate. That didn't work. Nevertheless, the battery voltage was showing as dropping relatively quickly, as if there was a load on it. It's all a bit puzzling to me. But perhaps someone here knows what I should pay attention to when I get it back. Alternatively, I bought an OMP2 before the trainer. Is there a way to buy a retrofit kit to convert it to a trainer?
I'm curious if you can broaden my understanding of this disaster and financial bankruptcy.
Hallo,
Mal ne Frage zum Trainer.
Ich hab gestern wieder mal eine Trainingseinheit nehmen wollen und hab mir zu meinem Burzeltach einfach mal die Zeit geleistet es endlich mal wieder tun zu können.
Also alles eingepackt und weil ich mit meiner Touch Control, die ich dank eurer Hilfe auf den Trainer portieren konnte, immer noch nicht sicher bin, die originale Steuerung genommen. Wind wurde mit 3,5m/s angegeben, aber es war auch böig gewesen, geschätzt das doppelte.
Wegen dem anderweitigen Flugbetrieb auf 4x8m eingestellt übte ich also in etwa 5-6m Höhe und auf einmal haute der Heli ab.
Ich bekam ihn nicht mehr unter Kontrolle, Modellflugkameraden waren nicht schnell genug zur Stelle und der Heli schlug irgendwo in einem Roggenfeld ein. Ich habe ihn gestern nicht finden können, wir haben mit 6 Leuten nach ner dreiviertel Stunde die Suche vorläufig aufgegeben.
Heute kauf ich mir ne gebrauchte Kameradrphne und wir werden die Suche nicht aufgeben.
Besteht die Möglichkeit das eine kräftige Windböe den kleinen aus dem Ultraschallkegel geschoben hat und damit unkontrollierbar machte? Ich hatte im Zusammenhang mit der Portierung auf die grosse Steuerung, so meine ich auch dei Rettungsfunktion zum Stabilisieren auf den Empfänger geladen. Sicher bin ich mir nicht, aber es funktionierte auch nicht. Ich hatte schon in einer Flugschule Unterricht gehabt und ein klein wenig kann ich den Helikopter eigentlich in der Schwebe halten und wieder einfangen. Aber es klappte garnichts. Auch dachte ich das ich vielleicht bei Motor an über den Heckrotor vielleicht ein Geräusch erzeugen könnte um ihn leichter finden zu können.war nicht so.trotzdem wurde angezeigt das die Akkuspannung relativ schnell dem Ende zuging, so als wäre Last drauf. Alles etwas unverständlich für mich. Aber vielleicht weiss ja hier jemand auf was ich künftig achten muss,wenn ich ihn zurück habe. Alternativ, ich hatte mir vor dem Trainer einen OMP2 gekauft gehabt. Gibt es eine Möglichkeit einen Nachrüstsatz auf Trainer kaufen zu können?
Bin gespannt ob ihr mir ein wenig mein Verständnis für dieses Desaster und finanziellen konkurs erweitern könnt.
Mal ne Frage zum Trainer.
Ich hab gestern wieder mal eine Trainingseinheit nehmen wollen und hab mir zu meinem Burzeltach einfach mal die Zeit geleistet es endlich mal wieder tun zu können.
Also alles eingepackt und weil ich mit meiner Touch Control, die ich dank eurer Hilfe auf den Trainer portieren konnte, immer noch nicht sicher bin, die originale Steuerung genommen. Wind wurde mit 3,5m/s angegeben, aber es war auch böig gewesen, geschätzt das doppelte.
Wegen dem anderweitigen Flugbetrieb auf 4x8m eingestellt übte ich also in etwa 5-6m Höhe und auf einmal haute der Heli ab.
Ich bekam ihn nicht mehr unter Kontrolle, Modellflugkameraden waren nicht schnell genug zur Stelle und der Heli schlug irgendwo in einem Roggenfeld ein. Ich habe ihn gestern nicht finden können, wir haben mit 6 Leuten nach ner dreiviertel Stunde die Suche vorläufig aufgegeben.
Heute kauf ich mir ne gebrauchte Kameradrphne und wir werden die Suche nicht aufgeben.
Besteht die Möglichkeit das eine kräftige Windböe den kleinen aus dem Ultraschallkegel geschoben hat und damit unkontrollierbar machte? Ich hatte im Zusammenhang mit der Portierung auf die grosse Steuerung, so meine ich auch dei Rettungsfunktion zum Stabilisieren auf den Empfänger geladen. Sicher bin ich mir nicht, aber es funktionierte auch nicht. Ich hatte schon in einer Flugschule Unterricht gehabt und ein klein wenig kann ich den Helikopter eigentlich in der Schwebe halten und wieder einfangen. Aber es klappte garnichts. Auch dachte ich das ich vielleicht bei Motor an über den Heckrotor vielleicht ein Geräusch erzeugen könnte um ihn leichter finden zu können.war nicht so.trotzdem wurde angezeigt das die Akkuspannung relativ schnell dem Ende zuging, so als wäre Last drauf. Alles etwas unverständlich für mich. Aber vielleicht weiss ja hier jemand auf was ich künftig achten muss,wenn ich ihn zurück habe. Alternativ, ich hatte mir vor dem Trainer einen OMP2 gekauft gehabt. Gibt es eine Möglichkeit einen Nachrüstsatz auf Trainer kaufen zu können?
Bin gespannt ob ihr mir ein wenig mein Verständnis für dieses Desaster und finanziellen konkurs erweitern könnt.
machine-translated from German · Show original