Hello and greetings to the group of experts.
I'm Klaus from Tyrol and I only recently joined this group, but I've been reading along for a while now ;-).
I'm currently flying a Logo 600 SX with 6 cells, which is a lot of fun. Now I'm planning to transfer the mechanics to a Hughes 500.
I'm trying to install a size 600 helicopter from Heli Center Berlin. And that's where I run into a problem. Their website specifies that if a LOGO 600 is to be installed, the Mikado upgrade kit 04326 for the longer tail boom is also required.
Unfortunately, I can't find this part online. Does anyone know this conversion kit and have any experience with the setup?
I would be really grateful for any information!!
Klaus
I'm Klaus from Tyrol and I only recently joined this group, but I've been reading along for a while now ;-).
I'm currently flying a Logo 600 SX with 6 cells, which is a lot of fun. Now I'm planning to transfer the mechanics to a Hughes 500.
I'm trying to install a size 600 helicopter from Heli Center Berlin. And that's where I run into a problem. Their website specifies that if a LOGO 600 is to be installed, the Mikado upgrade kit 04326 for the longer tail boom is also required.
Unfortunately, I can't find this part online. Does anyone know this conversion kit and have any experience with the setup?
I would be really grateful for any information!!
Klaus
Hallo und Servus in die Runde der Experten.
Ich bin der Klaus aus Tirol und erst kürzlich zu dieser Runde gestoßen, mitgelesen hab ich aber schon länger ;-).
Aktuell fliege ich einen Logo 600 SX mit 6 Zellen der echt viel Spaß macht. Jetzt plane ich die Mechanik in eine Hughes 500
von Heli Center Berlin der Größe 600 einzubauen. Und da stoße ich auch schon an das Problem. Auf der Homepage gibt er Hersteller an: Soll ein LOGO 600 eingebaut werden wird noch zusätzlich das Mikado-Upgradekit 04326 für das längere Heck Rohr benötigt.
Leider kann ich dieses Teil im Netz nicht finden. Kennt jemand von euch dieses Umbau Set und hat es schon verwendet, gibt es vielleicht Erfahrungen zu dem Setup?
Über Infos wäre ich euch echt dankbar!!
Klaus
Ich bin der Klaus aus Tirol und erst kürzlich zu dieser Runde gestoßen, mitgelesen hab ich aber schon länger ;-).
Aktuell fliege ich einen Logo 600 SX mit 6 Zellen der echt viel Spaß macht. Jetzt plane ich die Mechanik in eine Hughes 500
von Heli Center Berlin der Größe 600 einzubauen. Und da stoße ich auch schon an das Problem. Auf der Homepage gibt er Hersteller an: Soll ein LOGO 600 eingebaut werden wird noch zusätzlich das Mikado-Upgradekit 04326 für das längere Heck Rohr benötigt.
Leider kann ich dieses Teil im Netz nicht finden. Kennt jemand von euch dieses Umbau Set und hat es schon verwendet, gibt es vielleicht Erfahrungen zu dem Setup?
Über Infos wäre ich euch echt dankbar!!
Klaus
machine-translated from German · Show original