I have a night flying plane, which I want to set up with VPlane. Is it possible to switch the LED lights on/off via VControl? What additional device would I need to buy?
Night Light Activation
VBar › VPlane / VBasic VLink ·
Started by mahbouni on 28 April 2015 15:1928.04.2015 15:19
mahbouni
28 April 2015 15:1928.04.2015 15:19
RV
28 April 2015 17:1528.04.2015 17:15
You need a app for your VBar Control and the right hints from our side to assign a switch and channel - and of couse some usual hardware for nightflying. ;-)
First -- which VBar will be used? Mini? Full? NEO?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
First -- which VBar will be used? Mini? Full? NEO?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
mahbouni
28 April 2015 19:1328.04.2015 19:13
Well I just fitted a Mini Blueline to my Night Visionaire. Currently I have to turn on the lights with a switch inside the model. Hopefully maiden flight on Friday.
I will be buying a Neo when released but I want to try that in a heli first.
1 mal bearbeitet. Zuletzt am 28.04.2015 19:14 von mahbouni.
I will be buying a Neo when released but I want to try that in a heli first.
1 mal bearbeitet. Zuletzt am 28.04.2015 19:14 von mahbouni.
RV
28 April 2015 20:0328.04.2015 20:03
OK - for mini:
On a VPlane Mini we have 2 outputs. RXA center pin is Cell 1 (Elevator) signal, RXA lower pin is Cell 4 (Rudder). Power supply must be taken from another RC with Y-Harness.
http://www.vstabi.info/en/node/1797
for NEO:
Much more can be used
http://www.vstabi.info/en/node/1914
in both cases i would use a 3-level cell from the regarding output socket - and program it as 3-level.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
On a VPlane Mini we have 2 outputs. RXA center pin is Cell 1 (Elevator) signal, RXA lower pin is Cell 4 (Rudder). Power supply must be taken from another RC with Y-Harness.
http://www.vstabi.info/en/node/1797
for NEO:
Much more can be used
http://www.vstabi.info/en/node/1914
in both cases i would use a 3-level cell from the regarding output socket - and program it as 3-level.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.