Hello everyone,
Here are a few more ideas/wishes from me for what I think would be a great feature/app for the VBar:
1. Local Updates:
Since I'm a lazybones and usually don't feel like getting the helicopter off the shelf, finding a LiPo battery, and turning everything on just to do an update, I often postpone it until I get to the flying field. But then you still have to set up a hotspot with your phone just to install updates. :-)
My idea is this: at home via Wi-Fi, you could simply download all available updates to the VBar Control beforehand. The 4 GB of internal memory should be more than enough for that. Then, the next time you switch on the helicopter, you could perform the update directly, without needing a hotspot or internet connection at the airfield.
Since the VBar Control doesn't know which software version is currently installed on the VBar without a connection, in my opinion you could simply save all available software versions locally on the VBar Control (there aren't that many).
2. Automatic Update Notices:
Since you release minor updates and bug fixes quite regularly, it would be great if the Mikado News app would notify users, for example, "Bugfix XYZ is available." This would encourage users to regularly update their VBar Control and keep the software up to date. (And it's good advertising too, as it lets users know that the software is constantly being improved and maintained.)
Even better, however, would be a solution like those used on Android or Apple phones. Small updates run automatically in the background, while larger updates are displayed (ideally with a changelog) and can then be manually approved.
3. Auto Rotation Rescue:
Since I finally want to practice autorotations next season, here's another idea that could make the whole thing more relaxed:
If you set the motor switch to autorotation and then trigger the rescue function, the stabilizer not only tries to save the helicopter, but also starts the motor at the same time.
In comparison to a normal rescue, it might also be useful here for the rescue to remain active for a little longer, so that the helicopter is definitely back at a safe altitude and position.
It would be necessary to consider that the engine switch would still be in the autorotation position. The pilot would then have to switch the engine back to the "engine on" position before another autorotation rescue is possible. A corresponding announcement or warning message would probably be the best solution here.
4. Inverted Rescue / Rescue 2.0:
Why would I want an inverted rescue system? Either I've lost my bearings a bit and I want to realign the helicopter, or things have gone seriously wrong and the helicopter is about to crash into the ground (which I obviously want to prevent at all costs).
Currently, in its inverted state, the VBar performs a flip and then climbs away. This works perfectly as long as the helicopter is relatively stationary. However, if you're approaching the ground at a significant speed, you might miss those crucial milliseconds that would otherwise prevent a crash.
Other systems (OMP (OSF3), Rotorflight, Spirit) have, in my opinion, solved this more elegantly. Here, the helicopter first aligns itself horizontally (normal or inverted), actively climbs away, and only then, if necessary, is it rotated back into the normal horizontal orientation (see image 1).
Additionally, I think it would be great if the rescue system could be personalized a bit more. Personally, I'd like a rescue system that levels the helicopter as quickly and forcefully as possible and then only lets it climb a few meters.
Currently, you can essentially only adjust the rescue pitch, nothing more. However, if you increase it too much, the rescue will work better, but then the helicopter tends to transform into a Saturn V rocket and try to launch towards the moon, which isn't exactly the desired outcome.
Since these are functions that beginners don't necessarily need to deal with, it would make sense, in my opinion, to place such things in an expert menu.
5. Waking from standby in both directions:
It's really quite basic; currently, the VBar Control can only be woken from standby with a swipe from right to left. I think it would be nice if it also worked the other way around, from left to right :-)
6. VBar Evo USB Sim Mode:
I am currently using an old VBar Neo connected to a Betaflight flight controller (in USB HID_CDC mode) to use VBar Control for sim flying, as I am absolutely not a fan of a wired solution and the UDP/WLAN solution only works with Heli-X and then only if you are on the same WLAN and the router is configured correctly (as soon as you are not on the home network, it tends to cause problems).
My proposed solution would be dedicated simulator software (like VPlane) installed directly on the VBar Evo. The VSim adapter and VSim app were also available at one time. Then you would only need to connect the Evo to the PC via USB and could use the VBar Control wirelessly with virtually all simulators.
7. VPlane further development:
The last major update for the VPlane software was a few years ago now. I would really like to see another update. The hardware around VPlane, such as the VBasic receiver, satellite receiver, extender, and so on, is, in my opinion, very mature by now; it's just the software that's somewhat outdated.
Yes, in principle you can program pretty much anything you want with the VPlane software and macrocells, but unfortunately, it's not really simple or intuitive. The user interface and programming with macrocells are not very inviting for beginners. You first have to watch several videos about macrocells and also know, for example, that there's a separate vector control app that you also have to unlock.
I currently fly fixed-wing models with a Spektrum transmitter. Its user interface is so simple that in most cases I don't even need the manual to program wing mixers or similar functions. Although I'd really prefer to only take one transmitter to the flying field when I'm flying both helicopters and fixed-wing aircraft.
But there's no need to reinvent the wheel. My main goal is a simpler and clearer user interface, so that most settings and area mixers can be configured without macro cells, which would significantly simplify the overall programming.
However, since every user naturally has different ideas and requirements, it would also be useful in this context if other users could comment on what an ideal solution would look like for them.
8. Display event log events in the flight graph:
I currently find it somewhat cumbersome that one always has to switch back and forth between FlightGraph Beta and the event log (in the web browser) if one wants to find out whether relevant events occurred during the flight.
I think it would be better if the flight graph offered the option to display status messages, notes, or warnings directly in the graph at the relevant times. This would be similar to the current ability to show or hide individual values like current or voltage.
In this context, clearer naming would also be helpful. I suspect that many people aren't aware that the regular Flightgraph is sorted by flight time, while Graph Beta displays the data by time of day.
9. Advanced parameter linking:
Personally, I would like to see more customization options for the individual flight banks. Currently, you can only use three banks with different RPMs. However, I also like to fly with different agility at the same RPM. While this is possible, it uses up two banks just to have different agility at the same RPM.
Therefore, I think a more advanced parameter linking system would be useful. Currently, you can only assign a single parameter to a switch. It would be practical if you could assign multiple parameters per bank, such as maneuverability, control response, stop assist, etc., to a single switch. Essentially, three sub-banks per bank. This way, you could adjust the helicopter's behavior from smooth and relaxed to hardcore 3D at the same head speed.
10. Search on VStabi.Info:
Quite simply, the search function on VStabi.Info is currently broken and only returns an error message (see image 2):
warning: preg_replace(): Compilation failed: disallowed Unicode code point (>= 0xd800 && <= 0xdfff) at offset 1809 in /var/www/vhosts/vstabi.info/httpdocs/modules/search/search.module on line 334.
The search query must contain at least one valid keyword with at least 3 characters.
No matter what you search for, even simple terms like VBar, VSim, or update, you get the error message. This issue is browser-independent and occurs in Edge, Chrome, and Firefox alike.
And the search function is only available when you're logged in. I think it would be better if you could use the search function without an account. Then interested or new users could quickly find things on the site.
And if you ever need a guinea pig for new software or beta software, I'd be happy to volunteer :-)
Regards, Kilian
[Part 1: https://www.vstabi.info/forum/read.php?42,204062,204079 ]
Edited 3 time(s). Last edit at 11/26/2025 01:04PM by MikeBravo.
Here are a few more ideas/wishes from me for what I think would be a great feature/app for the VBar:
1. Local Updates:
Since I'm a lazybones and usually don't feel like getting the helicopter off the shelf, finding a LiPo battery, and turning everything on just to do an update, I often postpone it until I get to the flying field. But then you still have to set up a hotspot with your phone just to install updates. :-)
My idea is this: at home via Wi-Fi, you could simply download all available updates to the VBar Control beforehand. The 4 GB of internal memory should be more than enough for that. Then, the next time you switch on the helicopter, you could perform the update directly, without needing a hotspot or internet connection at the airfield.
Since the VBar Control doesn't know which software version is currently installed on the VBar without a connection, in my opinion you could simply save all available software versions locally on the VBar Control (there aren't that many).
2. Automatic Update Notices:
Since you release minor updates and bug fixes quite regularly, it would be great if the Mikado News app would notify users, for example, "Bugfix XYZ is available." This would encourage users to regularly update their VBar Control and keep the software up to date. (And it's good advertising too, as it lets users know that the software is constantly being improved and maintained.)
Even better, however, would be a solution like those used on Android or Apple phones. Small updates run automatically in the background, while larger updates are displayed (ideally with a changelog) and can then be manually approved.
3. Auto Rotation Rescue:
Since I finally want to practice autorotations next season, here's another idea that could make the whole thing more relaxed:
If you set the motor switch to autorotation and then trigger the rescue function, the stabilizer not only tries to save the helicopter, but also starts the motor at the same time.
In comparison to a normal rescue, it might also be useful here for the rescue to remain active for a little longer, so that the helicopter is definitely back at a safe altitude and position.
It would be necessary to consider that the engine switch would still be in the autorotation position. The pilot would then have to switch the engine back to the "engine on" position before another autorotation rescue is possible. A corresponding announcement or warning message would probably be the best solution here.
4. Inverted Rescue / Rescue 2.0:
Why would I want an inverted rescue system? Either I've lost my bearings a bit and I want to realign the helicopter, or things have gone seriously wrong and the helicopter is about to crash into the ground (which I obviously want to prevent at all costs).
Currently, in its inverted state, the VBar performs a flip and then climbs away. This works perfectly as long as the helicopter is relatively stationary. However, if you're approaching the ground at a significant speed, you might miss those crucial milliseconds that would otherwise prevent a crash.
Other systems (OMP (OSF3), Rotorflight, Spirit) have, in my opinion, solved this more elegantly. Here, the helicopter first aligns itself horizontally (normal or inverted), actively climbs away, and only then, if necessary, is it rotated back into the normal horizontal orientation (see image 1).
Additionally, I think it would be great if the rescue system could be personalized a bit more. Personally, I'd like a rescue system that levels the helicopter as quickly and forcefully as possible and then only lets it climb a few meters.
Currently, you can essentially only adjust the rescue pitch, nothing more. However, if you increase it too much, the rescue will work better, but then the helicopter tends to transform into a Saturn V rocket and try to launch towards the moon, which isn't exactly the desired outcome.
Since these are functions that beginners don't necessarily need to deal with, it would make sense, in my opinion, to place such things in an expert menu.
5. Waking from standby in both directions:
It's really quite basic; currently, the VBar Control can only be woken from standby with a swipe from right to left. I think it would be nice if it also worked the other way around, from left to right :-)
6. VBar Evo USB Sim Mode:
I am currently using an old VBar Neo connected to a Betaflight flight controller (in USB HID_CDC mode) to use VBar Control for sim flying, as I am absolutely not a fan of a wired solution and the UDP/WLAN solution only works with Heli-X and then only if you are on the same WLAN and the router is configured correctly (as soon as you are not on the home network, it tends to cause problems).
My proposed solution would be dedicated simulator software (like VPlane) installed directly on the VBar Evo. The VSim adapter and VSim app were also available at one time. Then you would only need to connect the Evo to the PC via USB and could use the VBar Control wirelessly with virtually all simulators.
7. VPlane further development:
The last major update for the VPlane software was a few years ago now. I would really like to see another update. The hardware around VPlane, such as the VBasic receiver, satellite receiver, extender, and so on, is, in my opinion, very mature by now; it's just the software that's somewhat outdated.
Yes, in principle you can program pretty much anything you want with the VPlane software and macrocells, but unfortunately, it's not really simple or intuitive. The user interface and programming with macrocells are not very inviting for beginners. You first have to watch several videos about macrocells and also know, for example, that there's a separate vector control app that you also have to unlock.
I currently fly fixed-wing models with a Spektrum transmitter. Its user interface is so simple that in most cases I don't even need the manual to program wing mixers or similar functions. Although I'd really prefer to only take one transmitter to the flying field when I'm flying both helicopters and fixed-wing aircraft.
But there's no need to reinvent the wheel. My main goal is a simpler and clearer user interface, so that most settings and area mixers can be configured without macro cells, which would significantly simplify the overall programming.
However, since every user naturally has different ideas and requirements, it would also be useful in this context if other users could comment on what an ideal solution would look like for them.
8. Display event log events in the flight graph:
I currently find it somewhat cumbersome that one always has to switch back and forth between FlightGraph Beta and the event log (in the web browser) if one wants to find out whether relevant events occurred during the flight.
I think it would be better if the flight graph offered the option to display status messages, notes, or warnings directly in the graph at the relevant times. This would be similar to the current ability to show or hide individual values like current or voltage.
In this context, clearer naming would also be helpful. I suspect that many people aren't aware that the regular Flightgraph is sorted by flight time, while Graph Beta displays the data by time of day.
9. Advanced parameter linking:
Personally, I would like to see more customization options for the individual flight banks. Currently, you can only use three banks with different RPMs. However, I also like to fly with different agility at the same RPM. While this is possible, it uses up two banks just to have different agility at the same RPM.
Therefore, I think a more advanced parameter linking system would be useful. Currently, you can only assign a single parameter to a switch. It would be practical if you could assign multiple parameters per bank, such as maneuverability, control response, stop assist, etc., to a single switch. Essentially, three sub-banks per bank. This way, you could adjust the helicopter's behavior from smooth and relaxed to hardcore 3D at the same head speed.
10. Search on VStabi.Info:
Quite simply, the search function on VStabi.Info is currently broken and only returns an error message (see image 2):
warning: preg_replace(): Compilation failed: disallowed Unicode code point (>= 0xd800 && <= 0xdfff) at offset 1809 in /var/www/vhosts/vstabi.info/httpdocs/modules/search/search.module on line 334.
The search query must contain at least one valid keyword with at least 3 characters.
No matter what you search for, even simple terms like VBar, VSim, or update, you get the error message. This issue is browser-independent and occurs in Edge, Chrome, and Firefox alike.
And the search function is only available when you're logged in. I think it would be better if you could use the search function without an account. Then interested or new users could quickly find things on the site.
And if you ever need a guinea pig for new software or beta software, I'd be happy to volunteer :-)
Regards, Kilian
[Part 1: https://www.vstabi.info/forum/read.php?42,204062,204079 ]
Edited 3 time(s). Last edit at 11/26/2025 01:04PM by MikeBravo.
Hallo zusammen,
hier sind mal ein paar weitere Ideen/Wünsche meinerseits, was ich als Feature/App für die VBar noch klasse fände:
1. Lokale Updates:
Da ich eine faule Socke bin und meistens zu Hause keine Lust habe, extra den Heli vom Schrank zu holen, einen Lipo rauszusuchen und alles einzuschalten, nur um ein Update zu machen, verschiebe ich das Ganze oft auf den Flugplatz. Da muss man dann aber immer noch erst einen Hotspot mit dem Handy aufmachen, nur um Updates zu installieren. :-)
Meine Idee wäre daher: Zu Hause im WLAN könnte man sich einfach alle verfügbaren Updates vorab auf die VBar Control herunterladen. Der interne Speicher mit 4 GB sollte dafür ja locker ausreichen. Beim nächsten Einschalten des Helis könnte man das Update dann direkt durchführen, ganz ohne Hotspot oder Internet auf dem Flugplatz.
Da die VBar Control ohne Verbindung ja nicht weiß, welche Softwareversion aktuell auf dem VStabi installiert ist, könnte man meiner Meinung nach einfach alle verfügbaren Softwareversionen lokal auf der VBar Control speichern (so viele sind’s ja nicht).
2.Automatische Update Hinweise:
Da ihr ja ziemlich regelmäßig kleinere Updates und Bugfixes rausbringt, wäre es eigentlich klasse, wenn man in der Mikado News App hier einen Hinweis bekommt, zum Beispiel „Bugfix XYZ ist verfügbar“. Hierdurch wird der Nutzer dann auch dazu gebracht, seine VBar Control regelmäßig zu updaten und die Software aktuell zu halten. (Und gute Werbung ist es auch, da man dann als Nutzer mitbekommt, dass die Software konstant verbessert und gepflegt wird)
Noch besser wäre aber eigentlich eine Lösung wie bei Android oder Apple Handys. Kleine Updates laufen automatisch im Hintergrund durch, größere Updates bekommt man angezeigt (am besten mit Changelog) und kann sie dann manuell bestätigen.
3. Auto Rotations Rettung:
Da ich in der nächsten Saison endlich mal Autorotationen üben will, hier noch eine Idee, die das Ganze entspannter machen könnte:
Wenn man den Motorschalter auf Autorotation legt und man dann die Rettung auslöst, versucht das Stabi nicht nur den Heli zu retten, sondern startet zeitgleich auch noch den Motor.
Im Vergleich zur normalen Rettung wäre es hier eventuell auch sinnvoll, dass die Rettung etwas länger aktiv bleibt, sodass der Heli definitiv wieder in einer sicheren Höhe und Position ist.
Hier müsste man natürlich dabei berücksichtigen, dass sich der Motorschalter weiterhin in der Autorotationsstellung befindet. Der Pilot müsste den Schalter dann erst wieder auf Motor an umlegen, bevor eine erneute Autorotations Rettung möglich ist. Eine entsprechende Ansage oder Warnmeldung wäre hier vermutlich die beste Lösung.
4. Invertierte Rettung / Rettung 2.0:
Warum hätte ich gerne eine invertierte Rettung? Entweder habe ich ein wenig die Orientierung verloren und ich will den Heli wieder normal ausrichten, oder die Kacke ist ordentlich am Dampfen und der Heli ist kurz davor, in den Boden einzuschlagen (was ich natürlich auf jeden Fall verhindern will).
Aktuell macht das VStabi im invertierten Zustand ja erst einen Flip und steigt danach weg. Das funktioniert super, solange der Heli halbwegs statisch ist. Wenn man sich allerdings mit ordentlich Geschwindigkeit dem Boden nähert, können genau hier die entscheidenden Millisekunden fehlen, die einem sonst den Einschlag ersparen würden.
Andere Systeme (OMP (OSF3), Rotorflight, Spirit) haben das meiner Meinung nach etwas eleganter gelöst. Hier richtet sich der Heli zuerst horizontal (normal oder invertiert) aus, steigt aktiv weg und wird erst danach, falls nötig, in die normale horizontale Ausrichtung gedreht (siehe Bild 1).
Zusätzlich fände ich es klasse, wenn man die Rettung etwas mehr personalisieren könnte. Ich persönlich hätte gerne eine Rettung, die den Heli so schnell und brachial wie nur irgendwie möglich horizontal stellt und ihn anschließend nur ein paar Meter steigen lässt.
Aktuell kann man aber im Wesentlichen ja nur den Rettungspitch einstellen, mehr aber auch nicht. Dreht man den jedoch zu hoch, funktioniert die Rettung zwar besser, dafür mutiert der Heli danach gerne mal zur Saturn V Rakete und möchte Richtung Mond starten, was nicht unbedingt das Ziel ist.
Da es sich hierbei um Funktionen handelt, mit denen sich Einsteiger nicht unbedingt beschäftigen müssen, wäre es aus meiner Sicht hier sinnvoll, so etwas in einem Expertenmenü unterzubringen.
5. Aufwecken aus dem Standby in beide Richtungen:
Richtig banal, aktuell lässt sich die VBar Control nur mit einer Wischbewegung von rechts nach links aus dem Standby aufwecken. Ich fände es nett, wenn das auch umgekehrt von links nach rechts funktionieren würde :-)
6. VStabi Evo USB Sim Modus:
Ich nutze aktuell ein altes VStabi Neo, das an einen Betaflight Flightcontroller (im USB HID_CDC Modus) angebunden ist, um die VBar Control zum Simfliegen zu nutzen, da ich absolut kein Fan einer kabelgebundenen Lösung bin und die UDP / WLAN Lösung ja nur mit Heli-X funktioniert und dann auch nur, wenn man im gleichen WLAN ist und der Router richtig eingestellt ist (sobald man nicht im Heimnetzwerk ist, macht das gerne Probleme).
Mein Lösungsvorschlag wäre eine eigene Simulator Software (wie z.B. die VPlane Software), die direkt auf dem VStabi Evo installiert wird. Den VSim Adapter und die VSim App gab es ja auch mal. Dann müsste man das Evo lediglich per USB an den PC anschließen und könnte die VBar Control mit praktisch allen Simulatoren kabellos nutzen.
7. VPlane Weiterentwicklung:
Das letzte größere Update für die VPlane Software ist inzwischen ja schon ein paar Jahre her. Hier würde ich mir wirklich mal wieder ein Update wünschen. Die Hardware rund um VPlane, also VBasic Empfänger, Satelliten Empfänger, Extender und so weiter, ist meiner Meinung nach inzwischen sehr ausgereift, nur die Software ist etwas veraltet.
Ja, grundsätzlich kann man mit der VPlane Software und den Makrozellen zwar so ziemlich alles programmieren, was das Herz begehrt, wirklich einfach oder intuitiv ist das Ganze aber leider nicht. Das Userinterface sowie die Programmierung mit Makrozellen sind für Einsteiger wenig einladend. Man muss sich erst diverse Videos zu den Makrozellen anschauen und zusätzlich zum Beispiel wissen, dass es eine separate Vektor Steuerungs App gibt, die man sich aber auch erst einmal freischalten lassen muss.
Ich fliege aktuell Flächenmodelle mit einem Spektrum Sender. Dort ist das Userinterface so simpel gestaltet, dass ich in den meisten Fällen nicht einmal die Anleitung brauche, um Flächenmischer oder ähnliche Funktionen zu programmieren. Obwohl ich eigentlich gerne nur eine Fernsteuerung mit zum Flugplatz nehmen möchte, wenn ich Heli und Fläche fliege.
Aber es muss dabei auch nicht das Rad neu erfunden werden. Mir geht es vor allem um ein einfacheres und klareres Userinterface, sodass man die meisten Einstellungen und Flächenmischer ohne Makrozellen erledigen kann, was die Programmierung insgesamt deutlich vereinfachen würde.
Da aber natürlich jeder Nutzer andere Vorstellungen und Anforderungen hat, wäre es in diesem Zusammenhang auch sinnvoll, wenn sich andere Nutzer dazu äußern könnten, wie für sie eine ideale Lösung aussehen würde.
8. Ereignislog Events im Flightgraph anzeigen:
Ich finde es aktuell etwas umständlich, dass man immer zwischen FlightGraph Beta und dem Ereignislog hin und her wechseln muss (Im Webbrowser), wenn man herausfinden will, ob während des Fluges relevante Ereignisse aufgetreten sind.
Hier fände ich es besser, wenn man sich im Flightgraph optional die Statusmeldungen, Hinweise oder Warnungen direkt im Graphen zu den jeweiligen Zeitpunkten anzeigen lassen könnte. Vergleichbar mit der aktuellen Möglichkeit, einzelne Werte wie Strom oder Spannung ein und auszublenden.
In dem Zusammenhang wäre auch eine klarere Benennung sinnvoll. Ich vermute, dass viele gar nicht wissen, dass der normale Flightgraph nach Flugzeit sortiert ist, während der Graph Beta die Daten nach der Uhrzeit darstellt.
9. Fortgeschrittene Parameter Verknüpfung:
Ich persönlich würde mir hier generell etwas mehr Personalisierbarkeit bei den einzelnen Bänken wünschen. Aktuell kann man ja nur drei Bänke mit unterschiedlichen Drehzahlen nutzen. Ich fliege allerdings auch gerne mal mit unterschiedlicher Wendigkeit bei gleicher Drehzahl. Das ist zwar möglich, allerdings sind dafür dann direkt zwei Bänke „verbraucht“, nur um bei identischer Drehzahl eine andere Wendigkeit zu haben.
Daher fände ich eine weitergehende bzw. fortgeschrittene Parameter Verknüpfung sinnvoll. Aktuell kann man ja immer nur einen einzelnen Parameter auf einen Schalter legen. Praktisch wäre es, wenn man pro Bank mehrere Parameter wie Wendigkeit, Steuerverhalten, Stopp Unterstützung usw. gemeinsam auf einen Schalter legen könnte. Im Prinzip also drei Sub Bänke pro Bank. So könnte man bei gleicher Drehzahl den Heli von weich und entspannt bis hin zu Hardcore 3D einstellen.
10. Suche auf VStabi.Info:
Recht simpel, die Suche auf VStabi.Info ist aktuell kaputt und gibt nur eine Fehlermeldung (Siehe Bild 2):
warning: preg_replace(): Compilation failed: disallowed Unicode code point (>= 0xd800 && <= 0xdfff) at offset 1809 in /var/www/vhosts/vstabi.info/httpdocs/modules/search/search.module on line 334.
Es muss mindestens ein gültiges Stichwort in der Suchanfrage verwendet werden, das mindestens 3 oder mehr Zeichen enthält.
Egal wonach man sucht, selbst bei einfachen Begriffen wie VStabi, VSim oder Update, bekommt man die Fehlermeldung. Das Ganze ist browserunabhängig und tritt bei Edge, Chrome und Firefox gleichermaßen auf.
Und die Suche ist nur verfügbar, wenn man eingeloggt ist. Ich fände es besser, wenn man die Suche auch ohne Account nutzen könnte. Dann könnten auch interessierte oder neue Nutzer fix Sachen auf der Seite suchen.
Und falls ihr mal noch ein Versuchskaninchen für neue Software oder Beta Software braucht, stelle ich mich gerne zur Verfügung :-)
Gruß Kilian
[Teil 1: https://www.vstabi.info/forum/read.php?42,204062,204079]
Edited 3 time(s). Last edit at 11/26/2025 01:04PM by MikeBravo.
hier sind mal ein paar weitere Ideen/Wünsche meinerseits, was ich als Feature/App für die VBar noch klasse fände:
1. Lokale Updates:
Da ich eine faule Socke bin und meistens zu Hause keine Lust habe, extra den Heli vom Schrank zu holen, einen Lipo rauszusuchen und alles einzuschalten, nur um ein Update zu machen, verschiebe ich das Ganze oft auf den Flugplatz. Da muss man dann aber immer noch erst einen Hotspot mit dem Handy aufmachen, nur um Updates zu installieren. :-)
Meine Idee wäre daher: Zu Hause im WLAN könnte man sich einfach alle verfügbaren Updates vorab auf die VBar Control herunterladen. Der interne Speicher mit 4 GB sollte dafür ja locker ausreichen. Beim nächsten Einschalten des Helis könnte man das Update dann direkt durchführen, ganz ohne Hotspot oder Internet auf dem Flugplatz.
Da die VBar Control ohne Verbindung ja nicht weiß, welche Softwareversion aktuell auf dem VStabi installiert ist, könnte man meiner Meinung nach einfach alle verfügbaren Softwareversionen lokal auf der VBar Control speichern (so viele sind’s ja nicht).
2.Automatische Update Hinweise:
Da ihr ja ziemlich regelmäßig kleinere Updates und Bugfixes rausbringt, wäre es eigentlich klasse, wenn man in der Mikado News App hier einen Hinweis bekommt, zum Beispiel „Bugfix XYZ ist verfügbar“. Hierdurch wird der Nutzer dann auch dazu gebracht, seine VBar Control regelmäßig zu updaten und die Software aktuell zu halten. (Und gute Werbung ist es auch, da man dann als Nutzer mitbekommt, dass die Software konstant verbessert und gepflegt wird)
Noch besser wäre aber eigentlich eine Lösung wie bei Android oder Apple Handys. Kleine Updates laufen automatisch im Hintergrund durch, größere Updates bekommt man angezeigt (am besten mit Changelog) und kann sie dann manuell bestätigen.
3. Auto Rotations Rettung:
Da ich in der nächsten Saison endlich mal Autorotationen üben will, hier noch eine Idee, die das Ganze entspannter machen könnte:
Wenn man den Motorschalter auf Autorotation legt und man dann die Rettung auslöst, versucht das Stabi nicht nur den Heli zu retten, sondern startet zeitgleich auch noch den Motor.
Im Vergleich zur normalen Rettung wäre es hier eventuell auch sinnvoll, dass die Rettung etwas länger aktiv bleibt, sodass der Heli definitiv wieder in einer sicheren Höhe und Position ist.
Hier müsste man natürlich dabei berücksichtigen, dass sich der Motorschalter weiterhin in der Autorotationsstellung befindet. Der Pilot müsste den Schalter dann erst wieder auf Motor an umlegen, bevor eine erneute Autorotations Rettung möglich ist. Eine entsprechende Ansage oder Warnmeldung wäre hier vermutlich die beste Lösung.
4. Invertierte Rettung / Rettung 2.0:
Warum hätte ich gerne eine invertierte Rettung? Entweder habe ich ein wenig die Orientierung verloren und ich will den Heli wieder normal ausrichten, oder die Kacke ist ordentlich am Dampfen und der Heli ist kurz davor, in den Boden einzuschlagen (was ich natürlich auf jeden Fall verhindern will).
Aktuell macht das VStabi im invertierten Zustand ja erst einen Flip und steigt danach weg. Das funktioniert super, solange der Heli halbwegs statisch ist. Wenn man sich allerdings mit ordentlich Geschwindigkeit dem Boden nähert, können genau hier die entscheidenden Millisekunden fehlen, die einem sonst den Einschlag ersparen würden.
Andere Systeme (OMP (OSF3), Rotorflight, Spirit) haben das meiner Meinung nach etwas eleganter gelöst. Hier richtet sich der Heli zuerst horizontal (normal oder invertiert) aus, steigt aktiv weg und wird erst danach, falls nötig, in die normale horizontale Ausrichtung gedreht (siehe Bild 1).
Zusätzlich fände ich es klasse, wenn man die Rettung etwas mehr personalisieren könnte. Ich persönlich hätte gerne eine Rettung, die den Heli so schnell und brachial wie nur irgendwie möglich horizontal stellt und ihn anschließend nur ein paar Meter steigen lässt.
Aktuell kann man aber im Wesentlichen ja nur den Rettungspitch einstellen, mehr aber auch nicht. Dreht man den jedoch zu hoch, funktioniert die Rettung zwar besser, dafür mutiert der Heli danach gerne mal zur Saturn V Rakete und möchte Richtung Mond starten, was nicht unbedingt das Ziel ist.
Da es sich hierbei um Funktionen handelt, mit denen sich Einsteiger nicht unbedingt beschäftigen müssen, wäre es aus meiner Sicht hier sinnvoll, so etwas in einem Expertenmenü unterzubringen.
5. Aufwecken aus dem Standby in beide Richtungen:
Richtig banal, aktuell lässt sich die VBar Control nur mit einer Wischbewegung von rechts nach links aus dem Standby aufwecken. Ich fände es nett, wenn das auch umgekehrt von links nach rechts funktionieren würde :-)
6. VStabi Evo USB Sim Modus:
Ich nutze aktuell ein altes VStabi Neo, das an einen Betaflight Flightcontroller (im USB HID_CDC Modus) angebunden ist, um die VBar Control zum Simfliegen zu nutzen, da ich absolut kein Fan einer kabelgebundenen Lösung bin und die UDP / WLAN Lösung ja nur mit Heli-X funktioniert und dann auch nur, wenn man im gleichen WLAN ist und der Router richtig eingestellt ist (sobald man nicht im Heimnetzwerk ist, macht das gerne Probleme).
Mein Lösungsvorschlag wäre eine eigene Simulator Software (wie z.B. die VPlane Software), die direkt auf dem VStabi Evo installiert wird. Den VSim Adapter und die VSim App gab es ja auch mal. Dann müsste man das Evo lediglich per USB an den PC anschließen und könnte die VBar Control mit praktisch allen Simulatoren kabellos nutzen.
7. VPlane Weiterentwicklung:
Das letzte größere Update für die VPlane Software ist inzwischen ja schon ein paar Jahre her. Hier würde ich mir wirklich mal wieder ein Update wünschen. Die Hardware rund um VPlane, also VBasic Empfänger, Satelliten Empfänger, Extender und so weiter, ist meiner Meinung nach inzwischen sehr ausgereift, nur die Software ist etwas veraltet.
Ja, grundsätzlich kann man mit der VPlane Software und den Makrozellen zwar so ziemlich alles programmieren, was das Herz begehrt, wirklich einfach oder intuitiv ist das Ganze aber leider nicht. Das Userinterface sowie die Programmierung mit Makrozellen sind für Einsteiger wenig einladend. Man muss sich erst diverse Videos zu den Makrozellen anschauen und zusätzlich zum Beispiel wissen, dass es eine separate Vektor Steuerungs App gibt, die man sich aber auch erst einmal freischalten lassen muss.
Ich fliege aktuell Flächenmodelle mit einem Spektrum Sender. Dort ist das Userinterface so simpel gestaltet, dass ich in den meisten Fällen nicht einmal die Anleitung brauche, um Flächenmischer oder ähnliche Funktionen zu programmieren. Obwohl ich eigentlich gerne nur eine Fernsteuerung mit zum Flugplatz nehmen möchte, wenn ich Heli und Fläche fliege.
Aber es muss dabei auch nicht das Rad neu erfunden werden. Mir geht es vor allem um ein einfacheres und klareres Userinterface, sodass man die meisten Einstellungen und Flächenmischer ohne Makrozellen erledigen kann, was die Programmierung insgesamt deutlich vereinfachen würde.
Da aber natürlich jeder Nutzer andere Vorstellungen und Anforderungen hat, wäre es in diesem Zusammenhang auch sinnvoll, wenn sich andere Nutzer dazu äußern könnten, wie für sie eine ideale Lösung aussehen würde.
8. Ereignislog Events im Flightgraph anzeigen:
Ich finde es aktuell etwas umständlich, dass man immer zwischen FlightGraph Beta und dem Ereignislog hin und her wechseln muss (Im Webbrowser), wenn man herausfinden will, ob während des Fluges relevante Ereignisse aufgetreten sind.
Hier fände ich es besser, wenn man sich im Flightgraph optional die Statusmeldungen, Hinweise oder Warnungen direkt im Graphen zu den jeweiligen Zeitpunkten anzeigen lassen könnte. Vergleichbar mit der aktuellen Möglichkeit, einzelne Werte wie Strom oder Spannung ein und auszublenden.
In dem Zusammenhang wäre auch eine klarere Benennung sinnvoll. Ich vermute, dass viele gar nicht wissen, dass der normale Flightgraph nach Flugzeit sortiert ist, während der Graph Beta die Daten nach der Uhrzeit darstellt.
9. Fortgeschrittene Parameter Verknüpfung:
Ich persönlich würde mir hier generell etwas mehr Personalisierbarkeit bei den einzelnen Bänken wünschen. Aktuell kann man ja nur drei Bänke mit unterschiedlichen Drehzahlen nutzen. Ich fliege allerdings auch gerne mal mit unterschiedlicher Wendigkeit bei gleicher Drehzahl. Das ist zwar möglich, allerdings sind dafür dann direkt zwei Bänke „verbraucht“, nur um bei identischer Drehzahl eine andere Wendigkeit zu haben.
Daher fände ich eine weitergehende bzw. fortgeschrittene Parameter Verknüpfung sinnvoll. Aktuell kann man ja immer nur einen einzelnen Parameter auf einen Schalter legen. Praktisch wäre es, wenn man pro Bank mehrere Parameter wie Wendigkeit, Steuerverhalten, Stopp Unterstützung usw. gemeinsam auf einen Schalter legen könnte. Im Prinzip also drei Sub Bänke pro Bank. So könnte man bei gleicher Drehzahl den Heli von weich und entspannt bis hin zu Hardcore 3D einstellen.
10. Suche auf VStabi.Info:
Recht simpel, die Suche auf VStabi.Info ist aktuell kaputt und gibt nur eine Fehlermeldung (Siehe Bild 2):
warning: preg_replace(): Compilation failed: disallowed Unicode code point (>= 0xd800 && <= 0xdfff) at offset 1809 in /var/www/vhosts/vstabi.info/httpdocs/modules/search/search.module on line 334.
Es muss mindestens ein gültiges Stichwort in der Suchanfrage verwendet werden, das mindestens 3 oder mehr Zeichen enthält.
Egal wonach man sucht, selbst bei einfachen Begriffen wie VStabi, VSim oder Update, bekommt man die Fehlermeldung. Das Ganze ist browserunabhängig und tritt bei Edge, Chrome und Firefox gleichermaßen auf.
Und die Suche ist nur verfügbar, wenn man eingeloggt ist. Ich fände es besser, wenn man die Suche auch ohne Account nutzen könnte. Dann könnten auch interessierte oder neue Nutzer fix Sachen auf der Seite suchen.
Und falls ihr mal noch ein Versuchskaninchen für neue Software oder Beta Software braucht, stelle ich mich gerne zur Verfügung :-)
Gruß Kilian
[Teil 1: https://www.vstabi.info/forum/read.php?42,204062,204079]
Edited 3 time(s). Last edit at 11/26/2025 01:04PM by MikeBravo.
machine-translated from German · Show original