Hello, first of all, I wish you all a healthy and successful new year!
After using Graupner (MX16 Hott) systems for years, I wanted to try something new and bought a VBar Control Touch with VBar EVo. My ESCs are Hobbywing 120A V5.
My question is, do I have to calibrate the controller exactly like with Graupner, throttle +100, then throttle -100 and let the helicopter run up to 50% during the governor, or does the controller adopt the settings after an update via telemetry?
Perhaps one more tip from you: should I use the governor of the controller or VBar?
I hope I've expressed myself clearly enough so you know what I mean!
Regards, Uwe
After using Graupner (MX16 Hott) systems for years, I wanted to try something new and bought a VBar Control Touch with VBar EVo. My ESCs are Hobbywing 120A V5.
My question is, do I have to calibrate the controller exactly like with Graupner, throttle +100, then throttle -100 and let the helicopter run up to 50% during the governor, or does the controller adopt the settings after an update via telemetry?
Perhaps one more tip from you: should I use the governor of the controller or VBar?
I hope I've expressed myself clearly enough so you know what I mean!
Regards, Uwe
Hallo, erst einmal Euch allen ein gesundes erfolgreiches neues Jahr!
Nach dem ich jahrelang Graupner (MX16 Hott) hatte, wollte ich mal was neues probieren und habe mir eine VBar Control Touch zugelegt mit VStabi EVo. Meine Regler sind Hobbywing 120A V5.
Meine Frage, muss ich den Regler genau wie bei Graupner anlernen, Gas +100, dann Gas -100 und den Heli beim Gov. mit 50% hochlaufen lassen oder übernimmt der Regler nach einem Update per Telemetrie die Einstellungen?
Vieleicht einen Tip noch von Euch, soll ich den Governor vom Regler nutzen oder VBar?
Ich hoffe ich habe mich einigermaßen ausgedrückt, damit ihr wisst was ich meine!
Gruß Uwe
Nach dem ich jahrelang Graupner (MX16 Hott) hatte, wollte ich mal was neues probieren und habe mir eine VBar Control Touch zugelegt mit VStabi EVo. Meine Regler sind Hobbywing 120A V5.
Meine Frage, muss ich den Regler genau wie bei Graupner anlernen, Gas +100, dann Gas -100 und den Heli beim Gov. mit 50% hochlaufen lassen oder übernimmt der Regler nach einem Update per Telemetrie die Einstellungen?
Vieleicht einen Tip noch von Euch, soll ich den Governor vom Regler nutzen oder VBar?
Ich hoffe ich habe mich einigermaßen ausgedrückt, damit ihr wisst was ich meine!
Gruß Uwe
machine-translated from German · Show original