Sbahzad
30 January 2026 08:4030.01.2026 08:40
Hello, I was flying my specter 700 with no issues .
The 3rd pack. Just before one min of flying I was doing piroflipa
It shutdown suddenly , and lost thrust. The backup power kicked in
I was able to land it on the skids
I lost sacrificial lower frame (cracked) canopy and one linkage.
One blade toke minor damage but need to be replaced.
Scorpion 220 A
2 x 5500 gen ace 6s battery with quick connecter
Ego drift 4530 HT 550 kv
Stock gears 9.63 ratio
Any thoughts what happen !!!!
Eddi E. aus G.
30 January 2026 09:2230.01.2026 09:22
Hi,
look at the graph: the flight pack voltage drops from round 48 V to around 9 V quickly, at some point.
look at the log: at some point also there, the Scorpion ESC also warns of under voltage, and seemingly cuts throttle.
Looks to me like an empty battery, or bad battery.
The ESC actually still supplied the r/c electronics via BEC, or so it seems, VBackup only kicked n after the incident (sensors out of range).
Kind regards
Eddi
Born to fly ...
forced to work.
Sbahzad
30 January 2026 13:4230.01.2026 13:42
I have noticed the log shows low volt. And just shutdown .
I thought battery got distracted somehow, but battery was connected. And healthy
Measured 48.7 volts with multimeter .
It looks like esc stoped getting volt.
I tested it at home everything works as it should
Eddi E. aus G.
30 January 2026 14:5030.01.2026 14:50
Hi,
I'd be curious what the Scorpion's internal log might have in it?
Best,
Eddi
Born to fly ...
forced to work.
RV
30 January 2026 17:0830.01.2026 17:08
Bad solder or connector could also be a reason.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Bad solder or connector could also be a reason.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Sbahzad
1 February 2026 16:1701.02.2026 16:17
I have tested the connections, monitoring the volt. it was healthy. I turned the motor on to draw more amp, moved the wires around the battery connections, it was stable. i attached the log from the esc.
( i did multi flights on the same pack with this soldering). if the connectors and the soldering is ok, then i suspect the tray has moved somehow and got the quick connecting to be lose. not logical though if it was not secure it would have ejected.
this is the latest update.
Attachments:
open |
download -
Specter ESC log.zip
(231.9 KB)
Eddi E. aus G.
2 February 2026 09:0602.02.2026 09:06
Hi,
I'm not familiar with interpreting the finer details of the Scorpion log, but what looks obviously odd are resets (first column) and of course the error messages VBAT (main battery voltage, I guess) and VBEC (BEC voltage).
I'd recommend discussing this with Scorpion support, they should be able to provide better insights.
Also provide our logs, they can also help.
Best,
Eddi
Born to fly ...
forced to work.
Vinger
13 February 2026 04:5313.02.2026 04:53
The last log that was an actual flight with all parameters typically of a flight is attached as a screenshot. You can clearly see the battery voltage deteriorating with the corresponding drop in motor rpm which eventually caused a reset of the ESC.
Check this battery under load to see if it can sustain the amp draw and check plugs and wiring.
Peter
VControl, VBar on all.
TDR, TDR2, TDF, TDS and TDSF
Peter