← Cafe

Vbar EVO - Beginner+Rescue Option translated

Public Talk › Cafe · Started by TanzderBlätter on 24 February 2026 17:1224.02.2026 17:12
TanzderBlätter 24 February 2026 17:1224.02.2026 17:12
Hello,

My helicopter drifts to the left in beginner mode via roll mode.

The mechanics were assembled cleanly and the trim flight was successfully carried out.
In rescue mode, the helicopter reliably ascends vertically.

Does anyone know about this problem in beginner mode and can show me a solution?
I would be grateful for any help with this problem!

Greetings from Austria!
Paul Klinkenhammer



Edited 1 time(s). Last edit at 02/24/2026 05:34PM by TanzderBlätter.
machine-translated from German · Show original
RV 24 February 2026 21:0424.02.2026 21:04
In beginner mode, the system first needs to "learn" the hovering position. This is particularly necessary for the side thrust compensation (which you can see).

So... in normal mode, align the helicopter properly, hover without any control input, and save the hover position using VBC in the rescue menu. That should do it.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
TanzderBlätter 24 February 2026 21:1724.02.2026 21:17
Hello Rainer,

Thank you for the quick response and the tip!

Greetings from Austria!
Paul Klinkenhammer
machine-translated from German · Show original
TanzderBlätter 25 February 2026 16:0225.02.2026 16:02
Hello Reiner,

Today I was able to adjust the settings in beginner mode and now everything is working as it should.

Thanks for your help!

Greetings from Austria!
Paul Klinkenhammer
machine-translated from German · Show original
RV 25 February 2026 16:0425.02.2026 16:04
:-) :-) :-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless