← Cafe

Message VBackup: Backup active translated

Public Talk › Cafe · Started by ikarus991 on 7 March 2026 22:0607.03.2026 22:06
ikarus991 7 March 2026 22:0607.03.2026 22:06
Hello, during my last flight with Logo700, the announcement "Backup active" was made during a maneuver.
That made me a little uneasy, but I continued flying and no further messages came through.
How should I evaluate this message?
- Is there anywhere I can read up on VBackup? (Its function and what the messages mean...)
The log contains
17:45:04 VBackup:Backup active!
17:45:04 Power restored, cap 7.2V

Do I need to do anything?

Regards, Wolfgang

wolfgang
machine-translated from German · Show original
RV 8 March 2026 21:3908.03.2026 21:39
Yes - then the voltage and its slope during the drop were such that the VBackup kicked in. This can be caused, for example, by the servos and the BEC.

If this happens more often, but the helicopter itself is OK, you can lower the threshold a bit in the VBackup app ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
ikarus991 8 March 2026 23:2908.03.2026 23:29
Hello Rainer,
Thanks for the info,
I will observe and familiarize myself with the app.
Do I need to install anything for that?
Regards, Wolfgang

wolfgang
machine-translated from German · Show original
Eddi E. aus G. 9 March 2026 09:1709.03.2026 09:17
Hi Wolfgang,

No, not really. The VBackup app has everything you need.

If you could recreate this on the ground with leaves (a few sharp pitch movements), you could use the oscilloscope app from the Pro/Value and an EVO to visualize what's happening, in order to better evaluate whether everything is (still) safe or – oops – the voltage is dropping dangerously low.

If in doubt, a good old electrolytic capacitor in parallel can help, simply for the peaks, to smooth out the signal where the backup (actually intended as an emergency power generator) is somewhat slower.

Another thought: some BECs are more resilient if you don't set the voltage to the maximum: 8.4 V -> dips, 7.4 V ... everything's fine.
They can only deliver their maximum power (P=U*I) if they are at the limit with the given servos; you can perhaps compensate for something via the voltage.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
ikarus991 9 March 2026 12:5709.03.2026 12:57
Hi Eddi,
mine and with EVO the VBAR Control EVO or VBAR Evo (receiver)
Sorry, sometimes I don't understand the terminology....

I do have a VBAR Controll EVO with Pro, but a Vbar Neo is working on the Logo700.
Can I test it with the oscilloscope app using the components you already have, as you described?

Thanks, Wolfgang

wolfgang
machine-translated from German · Show original
Eddi E. aus G. 10 March 2026 09:2710.03.2026 09:27
Good morning,

When I mean the transmitter, I usually write VBar Control to avoid any confusion.

But the oscilloscope function was only introduced with the (VBar) EVO; this is not yet possible with the (VBar :-) ) NEO.
VBar Control Touch or EVO/+ with Pro/Value Pack.

Somehow, we settled the matter with the terminology at the latest when we adopted the English term VBar (for VBar, Virtual FlyBar, Virtual Stabilizing Bar) for the transmitter in general, hence VBar Control.
VControl would have been better, but there were trademark concerns...

In the wild, everything is a VBar..., and upon further inquiry, what kind, yes, a blue one :-)

Grüßle

Eddi

Born to fly ...
forced to work.



Edited 3 time(s). Last edit at 03/10/2026 09:29AM by Eddi E. aus G..
machine-translated from German · Show original
ikarus991 10 March 2026 23:4710.03.2026 23:47
Okay, let's get bogged down...

wolfgang
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless