← Cafe

No new data in the cloud? translated

Public Talk › Cafe · Started by martin_fuerst on 11 March 2026 11:2511.03.2026 11:25
martin_fuerst 11 March 2026 11:2511.03.2026 11:25
Hello,

My Vbar Control EVO (11006244) has not been transmitting since Monday (March 9th).
Flights (8) and no newly saved setup to the cloud.
Connecting to Wi-Fi works flawlessly (tried several times) and I also tried it on a Mac.
The transmitter wasn't plugged in anywhere.

Does anyone know anything about this?

Thanks and best regards.
Martin



Edited 1 time(s). Last edit at 03/11/2026 11:28AM by martin_fuerst.
machine-translated from German · Show original
Eddi E. aus G. 11 March 2026 11:5111.03.2026 11:51
Hi Martin,

First, let's get the stupid question out of the way: Are the online service and cloud service also activated?

Then... something may still have been corrupted in the file system; here you can use Windows (right mouse, properties, tools) or macOS (Disk Utility) to check and repair the disk.

You can also easily find corrupted files and folders by trying to copy everything to your PC. If you get error messages, bingo.

Next, check if there are any cryptically named or oversized folders or files (or files that were once folders) that you can delete.

Try again.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
thomas1130 11 March 2026 12:1511.03.2026 12:15
Hi Martin,

So it's definitely not the cloud's fault - my Evo+ uploaded all flights and setups to the cloud without any problems yesterday.

Best regards,
Thomas
machine-translated from German · Show original
martin_fuerst 11 March 2026 12:4211.03.2026 12:42
Thanks for the feedback!
Are the online service and cloud service also activated? - Yes, nothing has changed.
and is activated.

Very strange - I'll report back...
machine-translated from German · Show original
martin_fuerst 11 March 2026 13:0511.03.2026 13:05
Unfortunately, or fortunately, no errors were found?



Edited 1 time(s). Last edit at 03/11/2026 01:05PM by martin_fuerst.

machine-translated from German · Show original
Eddi E. aus G. 11 March 2026 13:2111.03.2026 13:21
Well, that's already a good start.

By right-clicking and selecting Properties, you can also see somewhere whether the so-called archive bit is set (x) Archive or something similar.
This is normally removed when the sender has backed up an item to the cloud, so that in the next backup only items that have not yet been transferred are transferred.

If in doubt, you can select everything, right-click, select Properties, and reset the archive bit for all elements; this will save everything again, including anything that might still be missing.

Rainer can surely check your cloud sometime to see if there's a cork in it.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
martin_fuerst 11 March 2026 13:5411.03.2026 13:54
Two flights from yesterday just barely "arrived", those from the day before yesterday did not.
I'll set the archive bit and see.
However, taking a look at Rainer's cloud storage wouldn't hurt ;-)

Thanks
LG
Martin



Edited 1 time(s). Last edit at 03/11/2026 01:55PM by martin_fuerst.
machine-translated from German · Show original
RV 11 March 2026 17:0411.03.2026 17:04
Hello everyone,

At first glance, nothing seems out of the ordinary. Let me know if it worked.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
martin_fuerst 11 March 2026 17:2911.03.2026 17:29
Hello Rainer,

I just made four more flights - the transmitter has been connected to the Wi-Fi for 10 minutes.
and, as a test, also beforehand on the meadow at the hotspot (mobile phone).
There's nothing in the cloud yet (2 flights from yesterday and 4 from now).

A minor detail:
Of the two flights I made with the new Logo 200V8 in November,
There's only one in the cloud now. It doesn't really matter, but it's still strange.

LG
Martin



Edited 3 time(s). Last edit at 03/11/2026 05:32PM by martin_fuerst.
machine-translated from German · Show original
martin_fuerst 11 March 2026 18:5911.03.2026 18:59
Update:
No new data has arrived in the cloud.
machine-translated from German · Show original
RV 11 March 2026 19:4011.03.2026 19:40
I see 10 new directories on the FTP server under flights with today's date. Setup was done on March 1st.

- Did you apply the archive bit to all files and subfolders in /models and /vbar?
- What happens if you take a screenshot? Does it arrive?

If nothing else works, do the following:

- Zip the entire drive and send it to me via email at vstabi (at) mikado-heli.de

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
martin_fuerst 11 March 2026 20:5411.03.2026 20:54
>>> - Did you apply the archive bit to all files and subfolders in /models and /vbar?
Yes, I have.

>>> - What happens if you take a screenshot? Does it arrive?
No, it won't arrive.


I'll send you the drive as a zipped file.

LG
Martin
machine-translated from German · Show original
RV 12 March 2026 07:1312.03.2026 07:13
Martin, the data is fine on my end. It's also getting to the cloud (tested) - but it takes time.

We could do a trick, but Eddi would have to do it; I don't really have time for that right now.

For Eddi:
Martin sent a zip code from VBC and then didn't fly again until it was finished.
- Delete VBC in the service and also in the cloud
- zip to other VBC in the service
- Let it be clouded (takes 1-2 hours, it's a lot!)
- Martin's VBC in the same account
- Martin's VBC on PC also deletes data
- Kill Martin's VBC Cloud
- Transfer to cloud
- Cloud Recovery

For Martin:
If you're okay with the version I sent you, then we can do that. But it will take 2-3 days due to time constraints.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




Edited 2 time(s). Last edit at 03/12/2026 07:15AM by RV.
machine-translated from German · Show original
martin_fuerst 12 March 2026 07:3312.03.2026 07:33
Hello Rainer,

The version I sent would be OK!

I only have time from the afternoon onwards today.
to continue. I'll be there tomorrow morning.
not even to the PC.

What is the best way to do this?

LG
Martin
machine-translated from German · Show original
Eddi E. aus G. 12 March 2026 08:5512.03.2026 08:55
Hi Martin,

Please send me the zip file to service(at)mikado-heli(dot)de, then I can prepare it afterwards.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
martin_fuerst 12 March 2026 09:1012.03.2026 09:10
Eddi E. from G. wrote:
-------------------------------------------------------
Hi Martin,
>
Please send me the zip file to
> service(at)mikado-heli(dot)de, then I can do that
> prepare afterwards.
>
> Greetings
>
> Eddie

Thanks - just did it!

PS: I'll be out this morning and won't be available until midday.
Back to the PC this afternoon

LG
Martin



Edited 1 time(s). Last edit at 03/12/2026 09:10AM by martin_fuerst.
machine-translated from German · Show original
Eddi E. aus G. 12 March 2026 11:1312.03.2026 11:13
One item included... interesting, the files in the zip didn't have the archive bit set, I was initially wondering why my transmitter wouldn't uncloud...

It's working now.

When my transmitter is finished, I'll park it in Martin's account and copy the data to his (which I've already deleted).

Martin, then all you really need to do is wipe your transmitter (settings, USB stick mode, on PC, select everything, delete, don't forget to eject the drive, then unplug the USB), and in your cloud, tap on (Details/Image), (Recovery), and... wait.

I'll write again when I'm ready.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
RV 12 March 2026 12:4312.03.2026 12:43
Please wipe Martin's VBC before providing the data, otherwise things will get messed up.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
martin_fuerst 12 March 2026 12:4712.03.2026 12:47
So, back home to continue.

Data deleted on my VBC

Ready to restore - should I start?




Edited 1 time(s). Last edit at 03/12/2026 12:50PM by martin_fuerst.
machine-translated from German · Show original
Eddi E. aus G. 12 March 2026 12:5312.03.2026 12:53
Half-time

Yes, let's get started.

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
martin_fuerst 12 March 2026 12:5912.03.2026 12:59
It looks good - only the last flights are missing.

But it doesn't matter - everything will be here until February 27, 2026!



Edited 2 time(s). Last edit at 03/12/2026 01:02PM by martin_fuerst.
machine-translated from German · Show original
Eddi E. aus G. 12 March 2026 13:0412.03.2026 13:04
OK... that was everything that was in the zip.

Now please check if, for example, new screenshots or logs are being written directly to the cloud.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
martin_fuerst 12 March 2026 13:0512.03.2026 13:05
THANK YOU for your great service!

I took a screenshot (as a test) and it was immediately in the cloud :-)
machine-translated from German · Show original
martin_fuerst 12 March 2026 13:1212.03.2026 13:12
I quickly plugged in the Logo200 in the room and let it start up.
Flight and log in the cloud :-) :-)
machine-translated from German · Show original
Eddi E. aus G. 12 March 2026 13:1612.03.2026 13:16
Great!

Born to fly ...
forced to work.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless