Hey,
I'm not sure if I'm in the right thread with my problem ;-)
I have a small problem with the setup of my Goblin 770 Sport. It has a Scorpion Tribunus 2 200A ESC installed. The VBar is an Evo. I've wired everything correctly and it works fine so far. The heli flies, the RPM is displayed, etc. The RPMs on banks 1-2-3 are 1800-2000-2200 RPM. On bank 1, the displayed RPM is about 1780, on bank 2 it's 1885, and when I switch to bank 3, nothing happens.
The gas gauge on the touchscreen display shows 95 for bank 1 and 100 for bank 2. I think that's where the problem lies. However, I can't figure out how to change it.
mfg Kai
I'm not sure if I'm in the right thread with my problem ;-)
I have a small problem with the setup of my Goblin 770 Sport. It has a Scorpion Tribunus 2 200A ESC installed. The VBar is an Evo. I've wired everything correctly and it works fine so far. The heli flies, the RPM is displayed, etc. The RPMs on banks 1-2-3 are 1800-2000-2200 RPM. On bank 1, the displayed RPM is about 1780, on bank 2 it's 1885, and when I switch to bank 3, nothing happens.
The gas gauge on the touchscreen display shows 95 for bank 1 and 100 for bank 2. I think that's where the problem lies. However, I can't figure out how to change it.
mfg Kai
hei,
ich bin mir nicht sicher ob ich mit meinem problem im richtigen thread bin ;-)
ich habe ein kleines problem mit dem setup von meinem goblin 770 sport.verbaut ist ein scorpion tribunus2 200a regler.vstabi ist ein evo.ich habe alles richtig verkabelt und es funktioniert soweit auch.heli fliegt, drehzahl wird angezeigt usw.die drehzahlen auf bank 1-2-3 sind 1800-2000-2200umin.auf bank 1 ist die angezeigte drehzal ca 1780, auf bank 2 1885 und wenn ich auf bank 3 wechsele, passiert nichts.
die gas anzeige im display der touch zeigt auf bank 1 95 und auf bank 2 100.ich denke mal das hier das problem liegt.allerdings finde ich nicht heraus, wie das aendere.
mfg kai
ich bin mir nicht sicher ob ich mit meinem problem im richtigen thread bin ;-)
ich habe ein kleines problem mit dem setup von meinem goblin 770 sport.verbaut ist ein scorpion tribunus2 200a regler.vstabi ist ein evo.ich habe alles richtig verkabelt und es funktioniert soweit auch.heli fliegt, drehzahl wird angezeigt usw.die drehzahlen auf bank 1-2-3 sind 1800-2000-2200umin.auf bank 1 ist die angezeigte drehzal ca 1780, auf bank 2 1885 und wenn ich auf bank 3 wechsele, passiert nichts.
die gas anzeige im display der touch zeigt auf bank 1 95 und auf bank 2 100.ich denke mal das hier das problem liegt.allerdings finde ich nicht heraus, wie das aendere.
mfg kai
machine-translated from German · Show original