← Cafe

Extensions for VBar Power Backup - Power and Telemetry cable length

Public Talk › Cafe · Started by minet.axel on 31 March 2026 21:3831.03.2026 21:38
minet.axel 31 March 2026 21:3831.03.2026 21:38
Hi,

I am installing a VBar Power Backup (Orange) on my helicopter. Due to the layout, I have to place the unit at the front of the frame.

The original cables (Power and Telemetry) are already about 25cm (10 inches) long. To reach my VBar, I will need to add extensions (approximately 20cm) to both.

My concerns are:

1) Since the total length will be significant (25cm + extension), is there a risk of voltage drop that could affect the Backup's performance during an emergency?
2) What wire gauge (AWG) do you recommend for the power extension to handle the current safely over this total distance?
3) Will the telemetry signal remain reliable with this added length and an extra connector in between?
ulrich 31 March 2026 22:0831.03.2026 22:08
1) Yes, thats a not optimal. Voltage drop direcly translates into shorter Backup time. But you may test it, and see if it is acceptable.
2) the maximum you get into the Connector is 0.5mm^2 Which is about AWG21. Maybe its possible to squeeze in AWG20, which has already 50% less loss.
3) The telemetry signal is very robust, it will not have problems with much longer extensions.

so long ... Uli
http://www.vstabi.de
minet.axel 1 April 2026 05:2201.04.2026 05:22
Thank you.



Edited 1 time(s). Last edit at 04/20/2026 11:22PM by minet.axel.
VStabi VStabi Pioneer of Flybarless