← Cafe

Flying a stranger's helicopter with my VBar – how exactly does that work? translated

Public Talk › Cafe · Started by Jan_Privat on 18 April 2026 10:3518.04.2026 10:35
Jan_Privat 18 April 2026 10:3518.04.2026 10:35
Hello everyone,

A friend of mine also has a helicopter with Vstabi. Now I want to fly his helicopter with my transmitter.
How exactly do I proceed, what do I need to pay attention to?

I would have tried it this way, even though I knew better:
- Turn off his transmitter completely, connect the flight battery and see if I can bind my VBar.
- Ask him which flight phases he has configured and whether he has the rescue function available.
- Take off

Is it really that simple?

Best regards, Jan
machine-translated from German · Show original
Fingolf 18 April 2026 10:4318.04.2026 10:43
Exactly

Stephan
machine-translated from German · Show original
JMalberg 18 April 2026 21:4518.04.2026 21:45
Exactly!

The longest part is that your buddy has to remember what the flight phases are and what each option (1/2/3) does.
But flying always happens in seconds.

I already did that with RV and Fingolf, and the option thing took a while on my end. ("Uh...wait a minute....&quot ;-) :-)


If the idea that "rescue" is always option 1 is slowly gaining traction, all you need to do is check AND TEST whether that's actually true!

Regards, Jürgen
(Here are the missing commas for free use in my posts: ,,,,,,,,, )



Edited 1 time(s). Last edit at 04/18/2026 09:46PM by JMalberg.
machine-translated from German · Show original
Jan_Privat 19 April 2026 10:3619.04.2026 10:36
Thank you all, and thank you Jürgen for the tip about the options!
I have rescue set to 1 and AR to 2. His will probably be different.

Best regards, Jan
machine-translated from German · Show original
JMalberg 19 April 2026 12:0219.04.2026 12:02
Hi Jan,

Are you confusing options with switches?

MotorOff / AR / MotorOn is a complete function that cannot be separated and is assigned as a whole to a switch during switch assignment.

Rescue can be assigned to an option (e.g., Opt1), and the option is then linked to a switch.


The pilot knows which switch is linked to "Engine Off..." and Option 1. He only needs to know which option is linked to "Rescue".

Brief overview:
The link between option and function is embedded in the VBAR, therefore it is model-specific and nothing needs to be changed.

The connection to the switch is embedded in the VBC and is therefore specific to the VBC or pilot.
The pilot doesn't have to rethink anything and uses the sticks and switches as he always does.

That's why, when switching VBC, you only need to ask about it; nothing needs to be changed. A HUGE advantage!

Regards, Jürgen
(Here are the missing commas for free use in my posts: ,,,,,,,,, )



Edited 1 time(s). Last edit at 04/19/2026 12:02PM by JMalberg.
machine-translated from German · Show original
Jan_Privat 19 April 2026 13:1819.04.2026 13:18
Thank you for the explanation.

Quote: Brief overview:
The link between option and function is embedded in the VBAR.
You mean VBar here, right? The transmitter is called VBar Control Touch (Evo/+) and the receiver is VBar Evo something, correct?
Sorry, I'm still new to the Mikado universe and find the product names quite confusing.

Best regards, Jan
machine-translated from German · Show original
JMalberg 19 April 2026 14:1019.04.2026 14:10
VBAR = VBar = that thing in the model
as VBAR NEO (discontinued) or VBAR EVO


VBC = VBAR Control = that thingy in your hand
as VBC Evo+, VBC Touch, VBC Basic (only with flight trainer), VBC classic (discontinued)

:-)

Regards, Jürgen
(Here are the missing commas for free use in my posts: ,,,,,,,,, )
machine-translated from German · Show original
Eddi E. aus G. 20 April 2026 11:1420.04.2026 11:14
Good morning,

normal other:

For my own purposes, I assigned the engine (off-idle-on) to physical 2 (left middle), banks 1, 2, 3 to physical 3 (top left), L/S to physical 6 (bottom right), and assigned the rescue function there.

Mode 2, press Pitch.

The boss flies differently (throttle right, pull pitch, switch), and has backup elsewhere, and/or pushes/pulls his switches where I push/pull them (reverse).

We switch back and forth merrily because everything individual (including which is _my_ or _his_ rescue switch) is stored in the transmitter (VBar Control), and everything model-specific is stored in the VBar in the model.

There's no need for much consultation or coordination.

Things only get more complex with truly special functions (landing gear, flaps (on wings), lighting, possibly whether a switch is assigned to trim flight, less relevant (you'll notice it :-) telemetry announcements, screenshots... whether there are any duplicates, e.g., Option 1 would be for flaps, but the switch is in my transmitter, screenshot is taken every time the flaps are changed...), in these cases you may need to coordinate or familiarize yourself with it, or reassign/remap the (other) switches if they weren't properly separated (you often see double assignments when someone hasn't (yet) thought about things beyond motor-bank-L/S, for example, because... it's not used).

Option switches are simply a variable (Opt 1, 2, 3) assigned to a physical switch (the others, 1, 4, 5 in my example), and if they also have a special function (Nitro Throttle Cut), this applies regardless of the model or manufacturer.

The pre-flight check should include the functions I want or need to use (more complex models, nitro), but the motor bank is always a given, which is ultimately the most important thing.

Back to the helicopter, especially the electric trainer: bind, fly :-) it's that simple.

And perhaps scroll down to the second page (Touch/EVO) and check (switch through the banks) what maneuverability and speed settings are available for the model; then you can get a rough idea of what to expect.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless