← Cafe

Login to user account fails translated

Public Talk › Cafe · Started by robert-galitz on 6 June 2026 11:3306.06.2026 11:33
robert-galitz 6 June 2026 11:3306.06.2026 11:33
Hello, I need to flash a NEO from Vplane to helicopter mode. For this, I need access to the VBar Control Manager. I can't log in with my saved passwords.
The page now states: "You can log in here with your access from the Mikado webshop, which represents the Mikado ID - and is not the Formus login."
I can log in to the Mikado webshop. However, I cannot log in to my user account with those details.
I have two logins in my user account: robertgalitz@mac.com and moceanverlag@mac.com . I need access to both.
Thank you so much, Robert
machine-translated from German · Show original
RV 6 June 2026 20:2106.06.2026 20:21
Hello Robert,

Create a new password for yourself in the online shop. Make sure it doesn't contain any unusual special characters and isn't too long. As far as I know, there's a limit – and some customers figure it out.

Otherwise, email Eddi on Monday.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
robert-galitz 7 June 2026 20:0407.06.2026 20:04
Dear Rainer,
Thanks. It was the "absurd special characters"! The password actually only contained !"§$. But that was apparently too much. I created the sequence using !1234. That works :-) Best regards, Robert
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless