← Cafe

Battery ID automatic assignment is not working translated

Public Talk › Cafe · Started by Chl on 21 June 2026 06:1021.06.2026 06:10
Chl 21 June 2026 06:1021.06.2026 06:10
Hello,
I have both the old and the new version of the battery ID module.
With one device, the RFID tag is recognized as version 2, and with the other as version 3.
After assigning the RFID tag to the newer version, recognition with the old version no longer works.
The RFID reader outputs the same serial number, but automatic assignment does not occur.
What is the correct procedure in such a case?

greeting
machine-translated from German · Show original
RV 21 June 2026 14:3321.06.2026 14:33
Hmmm...

- It's the same battery with the same date
- The battery is recognized by a model with a current battery ID.
- The battery is not recognized by a model with an old battery ID.

Questions:

- Is the battery level visible in the battery logbook along with the flights on the VBar Control?
- Which VBar Control is being used?
- Is it the same VBar Control in both of the above cases?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Chl 22 June 2026 09:1822.06.2026 09:18
I tried it again today. It worked. I didn't make any changes. Very strange.

This is what the log looked like when the error occurred:
17.06.2026 10:17:33 Good;VBackup device detected
17.06.2026 10:17:34 Good; GPS Sensor Detected
17.06.2026 10:17:34 Good; Battery ID sensor detected
17.06.2026 10:17:34 Good; Battery ID detected: E2474553
17.06.2026 10:17:34 Good; Backup connected, cap: 5.8V
17.06.2026 10:17:35 Good; Calibration complete
17.06.2026 10:17:35 Good; New battery ID tag
17.06.2026 10:17:40 Good;VBackup minimum ready, cap:6.5V
17.06.2026 10:17:41 Good; Backup in standby
17.06.2026 10:17:44 Good; Manual battery selection: 2 XGen

It's working for now. I'll get back to you if I have another problem.

Thanks and regards
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless