← Cafe

Altitude sensor translated

Public Talk › Cafe · Started by mbotechman on 7 May 2026 15:2607.05.2026 15:26
mbotechman 7 May 2026 15:2607.05.2026 15:26
Hello,

since I now also fly gliders with my new system
Since I couldn't find an altitude sensor, here's my question:
Is this even available for the VbarNeo, and if so, where can I find it?
I'll buy the sensor.

If not, are there alternatives to connecting, and what should I do?
Then you have to make sure that everything works.

I am grateful for any advice.

Karl-Heinz
machine-translated from German · Show original
RV 7 May 2026 21:5007.05.2026 21:50
https://shop.mikado-heli.de/VBar-VBar-Elektronik/VBar-Control-Zubehoer/Telemetrie/Airspeed-Altitude-Sensor-weiss.htm?a=article&ProdNr=05385&p=8315

That would be perfect for you ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
mbotechman 8 May 2026 14:1108.05.2026 14:11
No, unfortunately not.

It should just be a small altitude sensor that can tell me how to rise and fall.
It signals and displays the altitude on the screen.

Just like Jeti, Graupner, etc. have it too.

LG
Karl-Heinz
machine-translated from German · Show original
Eddi E. aus G. 8 May 2026 14:4108.05.2026 14:41
Hi Karl-Heinz,

This one is all-in-one. It doesn't have a pitot tube, like an altimeter with a variable speed function, but it also has a speedometer.
He's small :-)

What's much 'stupid' is... they're currently unavailable :-/

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Max8200 22 June 2026 07:2822.06.2026 07:28
Lately I've been spending more time sailing again, but I find the steering feel of the VBC somehow better and would like to "sail" with it.

Is there any hope that the sensors 05385 / 05388 will be available again at some point, or is their listing in the shop just a relic from the past?
Can the sensors, or rather the VBCevo in conjunction with the sensor, display a proper vario output? Unfortunately, I haven't found anything about this...

Best regards,
Lars
machine-translated from German · Show original
Eddi E. aus G. 22 June 2026 09:3622.06.2026 09:36
Hi Lars,

There is currently little hope... the sensor was designed as a combination of speed and altitude, but in practice the feedback (especially from helicopter pilots) was 'mixed' because, due to its design, it only delivers reasonable values for speed from a higher minimum speed and with relatively free airflow.

Similar to GPS in helicopters, due to the dynamic nature and the comparatively slow update rate, and (without the support of additional sensors) its rather coarse accuracy for model aircraft, it is more of a nice gadget, but only sufficiently accurate under very specific conditions.

Fixed-wing/jet pilots have always fared better due to their flight profiles; they can even use the airspeed sensor effectively as a governor, for example to avoid falling below a minimum speed.

As a VARIO (barometric) it should work well, although I can't contribute any personal experience with that. I did fly fixed-wing aircraft and larger gliders in my distant past (3+ meters, probably still considered toys by many ^^), but (because it wasn't very common back then) I never had any assistance systems in the model, and it was more about slope soaring in good winds, less about thermal soaring...

Send an email to service (at) mikado-heli (dot) de, maybe you'll find something on Rudi's (Ralf's...) clearance rack...

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Max8200 22 June 2026 13:0922.06.2026 13:09
Rudi's leftover stock has something in the inbox :-)

Best regards,
Lars
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless