← Cafe

vcontrol classic gimbles loosing calibration after every flight.

Public Talk › Cafe · Started by fluidcombinations@hotmail.com on 1 October 2026 11:5101.10.2026 11:51
fluidcombinations@hotmail.com 1 October 2026 11:5101.10.2026 11:51
Hi guys

I'm having an issue with my vcontrol classic radio in that the gimbles are loosing calibration very easily and by the end of of a flight the the sticks require to be recalibrated. The reason I notice the the issue is because at the start of the flight my helis hold really locked precisely in position especially on the tail but during the flight I start to see drifting introduced more and more on the tail. When I check the calibration screen again its no longer at 0 when at centre sticks. After doing another calibration again everything flies as it should until it looses calibration again.

I'm guessing my pots could be worn out or gimbles may need changing. Can you offer any input?

Many thanks

Andy
Eddi E. aus G. 1 October 2026 13:1201.10.2026 13:12
Hi Andy,

well, you're probably right. Is it one axis or one gimbal only, or both/all?

Please open a service ticket at vstabi.info/devices, and we'll take it from there.

Options are basically, you send it in for us to repair it, or we send a new set of gimbals for DIY, or we find someone like Midland Heli to fix it for you, on the island.

Best,

Eddi

Born to fly ...
forced to work.
fluidcombinations@hotmail.com 1 October 2026 13:4001.10.2026 13:40
Hi Eddi

Yeh sounds as expected then. It's actually on most gimbles axis now but the rudder is by far the worst.

Im more than happy to change the gimbles myself if they can be supplied to me. Can i ask what a set of gimbles would cost?

Many thanks
VStabi VStabi Pioneer of Flybarless