Julian
17 November 2025 16:1617.11.2025 16:16
Hello,
I'm currently setting up the new Freewing Ares for a friend, and he'd like to fly it with two Neos :-) Now our problem: how can we mix the ailerons with the elevator via a switch? If we do it via elevons, it works, but that's not switchable!
Regards, Julian
hallo,
ich stelle gerade für einen freund die neue ares von freewing ein und er würde sie gerne mit zwei neo‘s betreiben:-) jetzt unser problem: wie können wir die querruder über einen schalter zu den höhenruder mischen? wenn wir es über elevon machen funktioniert es, ist aber nicht schaltbar!
lg julian
Eddi E. aus G.
17 November 2025 16:4617.11.2025 16:46
Hi Julian,
Generally, everything is possible :-)
Please describe in more detail what should happen and when, and send a link to the model or its instructions...
Grüßle
Eddi
Born to fly ...
forced to work.
Hi Julian,
generell geht alles :-)
Beschreibe bitte mal genauer, was wann passieren soll, und schick einen Link zum Modell oder zur Anleitung davon ...
Grüßle
Eddi
Born to fly ...
forced to work.
Julian
18 November 2025 18:2618.11.2025 18:26
Hello Eddie,
https://www.lindinger.at/media/a1/04/28/1756295563/9812449_EN_Manual.pdf?ts=1759905852 This is the link to the instructions!
It's specifically about the setting in the 3D setup :-) with the ailerons.
Best regards and have a nice evening.
Julian
hallo eddi,
https://www.lindinger.at/media/a1/04/28/1756295563/9812449_EN_Manual.pdf?ts=1759905852
das ist der link zur anleitung!
es geht genau um die einstellung im 3d setup :-) mit den querrudern
lg und schönen abend
julian
Eddi E. aus G.
19 November 2025 09:2419.11.2025 09:24
Good morning,
So you want to mix the high frequencies to the cross frequencies, not cross frequencies to the high frequencies. And also the high frequencies to the flaps.
I think one would do this (using CH2 Quer as an example, this applies analogously to all):
Connect a multiplexer to MC02/CH2 (servo connection), select your preferred switch, A-center input CH2 (the original stabilized aileron function with all settings from the setup/wing mixer), switch B e.g. Makrozelle MC32
MC32 will be a mixer cell, inputs CH2 (...) and CH1 (the original stabilized aileron function with everything from the setup/wing mixer)
Mixing proportions according to taste
MC03 with MC33, MC04 (flap) with MC34, AUX3 (flap) with MC35, for example, then almost all are logically grouped together (03-33, 04-34 etc.), and you can also name them.
For the flaps, instead of CH2 (3) as input (or additionally?) use the MC09/Flap for the flap component from the setup/area mixer.
Practice makes perfect.
Excitingly, we have a not-yet-public app for vector control.
Give me a vector, Viktor... or a serial number... and I could unlock it.
Rudimentary documentation (there's nothing more yet) in the (?) help section, then.
Grüßle
Eddi
Born to fly ...
forced to work.
2 mal bearbeitet. Zuletzt am 19.11.2025 09:26 von Eddi E. aus G..
Moin,
Du willst also Höhe auf Quer mischen, nicht Quer zu Höhe. Und zudem Höhe zu den Klappen.
Dazu würde man denke ich (am Beispiel von CH2 Quer, gilt dann sinngemäß für alle):
. auf MC02/CH2 (Servoanschluss) einen Multiplexer legen, Schalter nach Wahl, A-Mitte Eingang CH2 (die originale stabilisierte Querruderfunktion mit allem, aus dem Setup/Flächenmischer), Schalter B bspw. Makrozelle MC32
. MC32 wird eine Mischer-Zelle, Eingänge CH2 (...) und CH1 (die originale stabilisierte Querruderfunktion mit allem, aus dem Setup/Flächenmischer)
. Mischanteile nach Gusto
MC03 mit MC33, MC04 (Klappe) mit MC34, AUX3 (Klappe) mit MC35 bpsw., dann sind fast alle logisch beieinander (03-33, 04-34 etc.), benamsen kann man sie ja auch noch.
Bei den Klappen statt CH2 (3) als Eingang (oder zusätzlich?) die MC09/Flap für den Klappen-Anteil aus dem Setup/Flächenmischer.
Versuch macht kluch.
Spannend, noch, wir haben eine noch-nicht-öffentliche App für Vektorsteuerung.
Gib mir'n Vektor, Viktor ... bzw. 'ne Seriennummer ... und ich könnte sie freischalten.
Rudimentäre Dokumentation (mehr gibt's noch nicht) in der (?) Hilfe, dann.
Grüßle
Eddi
Born to fly ...
forced to work.
2 mal bearbeitet. Zuletzt am 19.11.2025 09:26 von Eddi E. aus G..
Julian
20 November 2025 20:2120.11.2025 20:21
super,
Thank you :-)
The number is:
11004027
Thank you and best regards from Salzburg
Julian
super,
vielen dank :-)
die nr. lautet:
11004027
danke und liebe grüße aus salzburg
julian
Eddi E. aus G.
21 November 2025 08:5821.11.2025 08:58
Hi Julian,
Then update.
Grüßle
Eddi
Born to fly ...
forced to work.
Moin Julian,
dann update mal.
Grüßle
Eddi
Born to fly ...
forced to work.
Vinger
15 December 2025 15:4915.12.2025 15:49
I run a single Neo on my Avanti with flaps and TV. You do not need two Neos as the 9 servo ports should be enough. I use the Banks to have TV on only in bank 3 with aileron, elevator and rudder gains very high to get it nicely stabilized for high alpha and other beyond the stall manoeuvres.
VControl, VBar on all.
TDR, TDR2, TDF, TDS and TDSF
Peter