Hello,
I am currently working on equipping my fixed-wing aircraft with "RX-only" receivers so that I can also control them with the VBC.
This is about an electric glider:
"Previously," in addition to the timer for motor runtime, I also had a second timer that tracked the entire flight duration, from the first time the motor was started (full throttle as the start signal for the timer) until landing or disconnecting the battery. Where can I integrate this into the VBC? A basic stopwatch is already included, but it only runs when the motor is running.
I installed Pro Timer, but I'm somehow a bit too stupid to use it.
It would be great if you had a solution ready.
VG
Lars
I am currently working on equipping my fixed-wing aircraft with "RX-only" receivers so that I can also control them with the VBC.
This is about an electric glider:
"Previously," in addition to the timer for motor runtime, I also had a second timer that tracked the entire flight duration, from the first time the motor was started (full throttle as the start signal for the timer) until landing or disconnecting the battery. Where can I integrate this into the VBC? A basic stopwatch is already included, but it only runs when the motor is running.
I installed Pro Timer, but I'm somehow a bit too stupid to use it.
It would be great if you had a solution ready.
VG
Lars
Hallo,
ich bin ja gerade stetig dabei auch meine Flächenflieger mit "RX-only" Empfängern auszustatten um auch die mit der VBC steuern zu können.
Geht hier um nen Elektrosegler:
"Früher" hatte ich neben dem Timer für die Motorlaufzeit immer noch einen Zweiten der mir die gesamte Flugdauer, also vom ersten mal Motor starten (Motor Vollgas als Startsignal für die Uhr) bis zum landen bzw Akku abstecken. Wo bekomme ich das in die VBC rein? Ne 08-15 Stoppuhr ist ja eh schon mit dabei, aber die läuft nur wenn der Motor läuft.
Pro Timer habe ich installiert, bin aber irgendwie ein bisschen zu doof dazu.
Wäre super wenn ihr ne Lösung parat habt
VG
Lars
ich bin ja gerade stetig dabei auch meine Flächenflieger mit "RX-only" Empfängern auszustatten um auch die mit der VBC steuern zu können.
Geht hier um nen Elektrosegler:
"Früher" hatte ich neben dem Timer für die Motorlaufzeit immer noch einen Zweiten der mir die gesamte Flugdauer, also vom ersten mal Motor starten (Motor Vollgas als Startsignal für die Uhr) bis zum landen bzw Akku abstecken. Wo bekomme ich das in die VBC rein? Ne 08-15 Stoppuhr ist ja eh schon mit dabei, aber die läuft nur wenn der Motor läuft.
Pro Timer habe ich installiert, bin aber irgendwie ein bisschen zu doof dazu.
Wäre super wenn ihr ne Lösung parat habt
VG
Lars
machine-translated from German · Show original