← VPlane / VBasic VLink

Change mode via macrocells translated

VBar › VPlane / VBasic VLink · Started by MarcoWeh on 26 October 2026 19:1426.10.2026 19:14
MarcoWeh 26 October 2026 19:1426.10.2026 19:14
Hi,

Brief explanation: I primarily fly Mode 3 helicopters. However, I fly fixed-wing aircraft in Mode 1. I do NOT want to use the Vbar Evo's Mode app to switch modes. I would like the tail stick to act as the roll stick when flying fixed-wing aircraft in Vplane, and vice versa. How can I change this in Vplane's standard program so that the flaperons (two adjustable aileron servos) continue to function correctly?

Thank you so much for your answers.

Greetings Marco
machine-translated from German · Show original
RV 26 October 2026 21:3326.10.2026 21:33
That's not possible. That's exactly what the Mode Switcher app is for.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
MarcoWeh 26 October 2026 22:3626.10.2026 22:36
Is there any other way to do it without using the Mode Switcher app?
machine-translated from German · Show original
RV 26 October 2026 22:4726.10.2026 22:47
Quote: That's not possible. That's exactly what the Mode Switcher app is for.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
MarcoWeh 29 October 2026 20:5629.10.2026 20:56
I decided to give the app a try. I set copters and helicopters to "Default" Mode 3 (normal) and fixed-wing aircraft to Mode 1 (normal). I tested it with an Evo. When switching between V8 and Vplane, the modes change accordingly. That works.

I want to fly my indoor planes with a 6-channel RxOnly receiver (I have several of them), which uses VBasic, but the switching doesn't work because there's no Vplane installed. How can I achieve this with an RxOnly receiver? In the mode app, neither helicopter, fixed-wing aircraft, nor copter is selected for RxOnly.

Thanks for the reply
machine-translated from German · Show original
RV 29 October 2026 21:1529.10.2026 21:15
My approach would be to set the stick assignment for ALL VBasic as "default" and have all model types that do not correspond to this (then helicopter and copter) switch over.

Please try this out on the workbench.

Attention: If you are operating an RXOnly or VBasic in a helicopter, it will always be on the VBasic mapping.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
MarcoWeh 29 October 2026 21:2929.10.2026 21:29
Hello Rainer,

That's how I've solved it now, and it works. However, when I use my OMP M1 V3 with RxOnly, it switches to the wrong mode, just as you described. And that's exactly the mode I'm looking for for indoor use and "shock flyers" with RxOnly.

The mode switcher app isn't very helpful in this case. With a single aileron, it's not a problem; I just swap the connectors on the receiver only (Aileron vs. Rudder). Now, the model has two aileron servos, and I want them to be able to move downwards as flaperons.

Is there another solution? Basically, I just want to make the RxOnly "pilot" mode dependent.

Greetings Marco
machine-translated from German · Show original
RV 29 October 2026 23:0229.10.2026 23:02
Even if I were to include the option for VBasic, all models with VBasic would be affected, just as they are now, regardless of whether it's a helicopter, fixed-wing aircraft, car, boat, or anything else.


We can't solve this the way you're imagining.

Install a VBar as an FBL in the helicopters - that would be the solution.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Eddi E. aus G. 30 October 2026 09:0130.10.2026 09:01
Good morning,

However... am I on the wrong track here, or couldn't you simply swap the macrocell inputs in the setup in the special situation of VBasic/RX Only on a helicopter? There's really no logic behind that that could go wrong.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
MarcoWeh 30 October 2026 14:5930.10.2026 14:59
Hello Rainer,
Hi Eddi,

To be honest, I think installing a Vbar FBL in the M1 is almost impossible. The small Micro Sbus RxOnly barely fits. Besides, I wouldn't consider it worthwhile.

Regarding your post, Eddi: that's exactly how I imagined it. If that were possible, it would be great.
machine-translated from German · Show original
RV 30 October 2026 21:3430.10.2026 21:34
Eddi's suggestion might actually work. Try changing the MCs. Look at where the two inputs go and swap them between the MCs.

Quote: I also think that would be disproportionate.
Well - what makes sense in a hobby? - I've already modified a lot of things here... without asking about the purpose.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
MarcoWeh 30 October 2026 23:5830.10.2026 23:58
Hello Rainer,

And that's exactly where I need help.
I would need to know which MC I would have to change what in.

Thanks so much :-)

Greetings Marco



Edited once. Last edited on 30.10.2026 at 23:58 by MarcoWeh.
machine-translated from German · Show original
RV 31 October 2026 10:2631.10.2026 10:26
Have you watched the MCs?
Look inside each one without changing anything, then you'll figure it out!

Which MC (microcontroller) receives the roll and tail signals?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless