Psych101
26 July 2019 03:4626.07.2019 03:46
The event log shows a yellow warning "scorpion esc input signal" after connecting power. The esc and telemetry seems to be working fine though. Is this event in the log normal to see each time? It is only at the start of each log following power on and is not repeated during flight or other times.
Is there a list of all vbar events and their explanation?
RV
26 July 2019 19:5226.07.2019 19:52
The ESC related error codes are sent to us from the ESC. So we just display what Scorpion says.
Does the ESC have the latest Firmware?
Is the model powered on with Motor in OFF position and does this also be so unless all is initialized and loaded?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Psych101
27 July 2019 01:4527.07.2019 01:45
The esc has the latest v60 firmware.
After powering on with the motor switch in the off position, the event log typically shows:
Vstabi start -- model name
Scopion ESC detected (green tick)
Scopion Input Signal (warning)
Reset Reason: Power On (green tick)
Bank 1 Loaded (I am not touching bank switch)
Bank 2 Loaded (as above)
Motorswitch Motor Off (as above but with green tick)
Motorswitch Idle Bailout (as above with green tick)
Calibration Finished
Psych101
27 July 2019 01:5127.07.2019 01:51
The third post from the bottom in this forum seems to suggest this may be a known event that occurs for every tribunus esc:
http://www.air-helicopter.com/Tribunus-130-Vct-scorpion-input-signal_10726467.html
Ignore the first post in this linked thread as I don't have any of these additional problems.
RV
27 July 2019 07:1227.07.2019 07:12
Well … as stated … we just display what Scorpion says. This issue is "old" and i think it was solved by scorpion as it is only a wrong message during ESC bootup. Just checked my 120LV and also there.
I will report to scorpion again for next update.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Psych101
27 July 2019 07:2627.07.2019 07:26
Okay. Thanks for confirming nothing to worry about.