← VBar NEO/EVO VLink

Vbar S-Bus Micro OMP M2V3 Macro Cells

VBar › VBar NEO/EVO VLink · Started by johnpssa on 26 May 2026 12:2726.05.2026 12:27
johnpssa 26 May 2026 12:2726.05.2026 12:27
Vcontrol Touch - Vlink S.BUS micro RX - OMP M2 V3

I am trying to use Macro Cells to reduce negative pitch in Bank1.
My understanding is that Cell 33, 34 and 35 set the pitch curve.
I have set negative collective to -60, -80, -100 respectively and these numbers are shown in Macro Cell 36 as you move through the banks.

The problem is that the helicopter does not respond to these changes and remains at full negative.

I have software throttle enabled in the OMP app and when I change banks the head speed changes accordingly.

I have not use Macro Cells before so hopefully am missing something simple.

John Plumbley
Aaronheli 26 May 2026 21:5626.05.2026 21:56
Hey John,
you are totally right.

It seems the input in Macrocell 16 (collective pitch) is set to the collective stick input. Please change the input to MC36. Then you will be able to adjust the pitch curves in MC33, MC34, and MC35 as intended.
Thanks for your investigation. I will update the template shortly.

Happy flying! :-)

VStabi VStabi Pioneer of Flybarless