← VBar NEO/EVO VLink

Gear ratio set up

VBar › VBar NEO/EVO VLink · Started by GlenDavis1971 on 22 June 2026 17:1622.06.2026 17:16
GlenDavis1971 22 June 2026 17:1622.06.2026 17:16
How do i set a Gear ratio of 13.8:1

motor egofrift 4726ec 520kv 10 poles

the gear ratio setting only allows values upto 12.7
GlenDavis1971 22 June 2026 17:1822.06.2026 17:18
forgot add im using EVO 8.2 and scorpion tribrunus III telemetry
RV 22 June 2026 17:4422.06.2026 17:44
Simple:

Set double pole pair count and half gear ratio ;-)

here: 10 Pole Pairs (20 Poles) and 6.9 Gear ratio

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
GlenDavis1971 23 June 2026 18:1623.06.2026 18:16
Thanks

I assume the RPM read is half the actual RPM
RV 23 June 2026 22:0123.06.2026 22:01
Nope - the RPM will match then ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Eddi E. aus G. 24 June 2026 09:4624.06.2026 09:46
Hi,

it's simple math:

Example:
motor pulse count 115,440 (defined by kv * V * half the pole count, so 520 kv x 3,7 V x 12 cells x 5 ((10/2)) -> this is how often the ESC 'nudges' the motor per minute)
5 pole pairs (10 poles)
13.8 gear ratio

115,400 / 5 / 13.8 = 1,673 1/min head speed
or
115,400 / 10 ((5*2)) / 6.9 ((13,8/2)) = 1,673 1/min head speed

So the displayed head speed will be the same.

This is also why you can often enter the same values into the ESC's own software, so it's internal logging is accurate.

Best,

Eddi

Born to fly ...
forced to work.
VStabi VStabi Pioneer of Flybarless