← VBar NEO/EVO VLink

Kontronik Jive 120 telemetry connection to VBar Evo? translated

VBar › VBar NEO/EVO VLink · Started by Chriss on 28 February 2026 11:1828.02.2026 11:18
Chriss 28 February 2026 11:1828.02.2026 11:18
Hello,

Is it possible to connect an old Jive 120 to a VBar Evo telemetry system?

Thank you. Kind regards.
machine-translated from German · Show original
JMalberg 28 February 2026 12:5528.02.2026 12:55
No way!
The Jive 120 never had a TM. Tom's efforts, though considerable, did manage to conjure up some data, but the water has flowed down the Rhine for over 10 years.

Regards, Jürgen
(Here are the missing commas for free use in my posts: ,,,,,,,,, )
machine-translated from German · Show original
Chriss 28 February 2026 14:1028.02.2026 14:10
Hello Jürgen,

Thank you for the information. Would it also work with a Telme Kontronik module, perhaps?


Kind regards
machine-translated from German · Show original
Fingolf 28 February 2026 17:3028.02.2026 17:30
No.
machine-translated from German · Show original
Eddi E. aus G. 4 March 2026 09:2004.03.2026 09:20
Good morning,

The only roundabout way to get it: if you still have a current sensor or can find one used (they're no longer in production, thanks for asking ^^), you can at least get current, voltage, and capacity from it.

Settings can still only be adjusted using the stick beeps, and you can safely leave the governor off, letting the Jive handle the control (Mode 4 and others).

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless