← VBar NEO/EVO VLink

Telemetry log. BEC current/voltage translated

VBar › VBar NEO/EVO VLink · Started by Chriss on 4 March 2026 20:4904.03.2026 20:49
Chriss 4 March 2026 20:4904.03.2026 20:49
Hello,

Why is there no entry for BEC current/voltage in the flight log?


Kind regards
machine-translated from German · Show original
RV 4 March 2026 22:4004.03.2026 22:40
If we have an undervoltage on the RC side where the stabilizer reaches its critical thresholds, this is always logged and recorded.
Otherwise, the pilot can also set the alarm himself using the RC voltage alarm app, as he wishes.
Then there's VBackup, which also reports when it had to intervene.

Why not a controller? - Because it's not designed for it, and some models can't handle it. It's not necessary anyway – see points 1 and 2. Sufficient warnings are given when needed, even with the basic model (stabilizer only) without any other features.

And what if the pilot still wants the information (there are people who spend hours on this sort of thing instead of going flying)? - He can create his own graphical log with the Pro app - if the controller provides it, then it's there too.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless