← VBar NEO/EVO VLink

New video for the perfect setup V8.1/V8.2 translated

VBar › VBar NEO/EVO VLink · Started by Chriss on 4 April 2026 11:5904.04.2026 11:59
Chriss 4 April 2026 11:5904.04.2026 11:59
Hello,

There is a new setup guide for version V8.1/2.


https://www.youtube.com/watch?v=uqyDhmVvDSM

Kind regards
machine-translated from German · Show original
jgmeiner 4 April 2026 15:2004.04.2026 15:20
It's really great of Daniel to share his experience with us free of charge!
I can also endorse all of the suggested improvements.
Mikado team, could you please meditate on this for a moment?

Here's the link : https://youtu.be/KN0TsOyJOes?is=24TByagDw42pWPsO



Edited once. Last edited on 04/04/2026 at 15:40 by jgmeiner.
machine-translated from German · Show original
Bernd S. 5 April 2026 09:0705.04.2026 09:07
I've stumbled across Daniel's videos a few times and started to take a closer look at them.

The linked content is very interesting - I'll make a small donation via PayPal.

Because of too much work the last few days and too little coffee, I don't understand now:

Is 166 or 333 better for controlling the controller of a YGE-Aureus (the wording in the video is unclear to me)?

My new hardware setup in the old helicopter is (for me) already good - but there's certainly still room for improvement - and this video will definitely help with that.

Happy Easter !

Bernd
machine-translated from German · Show original
cc1975 5 April 2026 10:4205.04.2026 10:42
144 Hz. 333 Hz only for direct drives... He mentioned this several times.
machine-translated from German · Show original
Chl 6 April 2026 06:3006.04.2026 06:30
cc1975 wrote:
-------------------------------------------------------
> 144 Hz. 333 only for direct drives.........Has
> he mentioned it several times.


This applies to swashplate servos, but only with hard head damping and a 1500 ms center pulse.
The above post referred to the controller control.
My understanding is that normally 144 Hz works with YGE, but 333 Hz is also possible.
machine-translated from German · Show original
JMalberg 6 April 2026 10:1606.04.2026 10:16
The original YGE frequency was 72Hz. However, YGE can also be driven at 144Hz and higher. You just need to know what the consequences of that are.

Regards, Jürgen
(Here are the missing commas for free use in my posts: ,,,,,,,,, )
machine-translated from German · Show original
HelischuleGonzalez 7 April 2026 01:4107.04.2026 01:41
Chl wrote:
-------------------------------------------------------
> cc1975 wrote:
> --------------------------------------------------
> -----
144 hearts. 333 only for
Direct drives.........Has
> > he mentioned it several times.
>
>
This applies to the swashplate servos, but only
> with hard head damping and 1500 medium impulse.
The above post referred to the
> Controller control.
> I understood it to mean that normally 144 Hz at
> YGE also works at 333 Hz.


Helicopters with a blade length of 500 mm or larger, with normal or hard head damping (1500 Hz center pulse), use a 166 Hz frequency and the direct component trick. I've only had to use 144 Hz twice so far with one very poor servo, because nothing else worked.

Regarding the controller frequency, I have stated very clearly that 144Hz always works best, except for direct drives, where 333Hz is recommended, provided the controller supports it.

The prerequisite for 144 Hz to perform better than 333 Hz is a suitable base throttle and pitch adjustment, which is very easy to achieve by flying, as I have shown.

VG,
Daniel
machine-translated from German · Show original
Bernd S. 7 April 2026 18:0407.04.2026 18:04
Hi Daniel,

I also wrote that I had only skimmed the video so far.
(So the misinterpretation was mine)

Everything is well described - I just didn't quite grasp the part about the controller frequency because my mind wasn't clear during the "first" attempt at watching.

I will now go through things step by step for myself - the helicopters fly well, BUT certainly not perfectly.
(And I will gradually change that).

So, 100% praise for your work - tomorrow I'll take care of Paypal too.

My Logo 600SE is probably considered more like a TDR in terms of settings, then a pseudo-700 series.
I'll post the results later - there are many other (non-model helicopter) projects to complete.

THANK YOU for your work!!

Bernd
machine-translated from German · Show original
HelischuleGonzalez 7 April 2026 21:0507.04.2026 21:05
Hello Bernd,

Thanks for the feedback, have fun setting it up, and yes, the Logo 600 SE could also fall into the 333Hz category due to its soft headshell and soft mechanics.

But I already described how you can test it :-)
I just hope there aren't any old Savox units installed.

Good luck,
Daniel
machine-translated from German · Show original
Bernd S. 8 April 2026 08:0408.04.2026 08:04
HelischuleGonzalez wrote:
-------------------------------------------------------
Hi Bernd,

I just hope there aren't any old Savox units installed.

No, those are Futaba BLS 452 and ? 251 at the rear - warnings about Savöx were already being issued back then.

If all that works, the 600SX will also be on the table - it also has Futaba servos - the 451 on the swashplate - it's a low-voltage servo, but I'm the limiting factor anyway ;-) .

However, I just noticed that they can all handle higher voltages than the 6V that was common back then.
(but the 251 is max 6V - so read carefully first).

Thanks for all the information!

Bernd
machine-translated from German · Show original
E.Wiesel 12 April 2026 23:0912.04.2026 23:09
I really hope my VBar with Evo arrives this week!
I'm really excited to see how it flies compared to the NEO.

Daniel's videos look really promising.



Edited once. Last edited on 12/04/2026 at 23:11 by E.Wiesel.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless